[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Rdo-list] Trying to install the RDO



On Sun, Nov 15, 2015 at 1:41 PM, Hassan, Ashraf
<ashraf hassan t-mobile nl> wrote:
> I am using HP G6 baremetals, for all nodes, for the undercloud I have assigned a node of 48GB Memory and 300GB HDD, with the assumption it is needed for the controller but it appears now it might be to much for the undercloud, what do you think?

If you're using HP servers then the IPMI ips/credentials are the iLO
ones. I usually use a 16GB node for the undercloud. Most probably you
can go lower than that.

>     So the first NIC will be the one used for PXE boot.
>     I have read for the Wikipedia article, if I understand correctly that the IPMI IP which will be used for the power management, and it is different than the DHCP IP will be used for the deployment correct? Can they be in the same VLAN?

They can, just make sure they're out of the dhcp allocation ranges.

> Thanks,
> Ashraf
>
> ********************************************************************************
>
> N.B.: op (de inhoud van) deze e-mail is een DISCLAIMER met belangrijke VOORBEHOUDEN van toepassing: zie http://www.t-mobile.nl/disclaimer <http://www.t-mobile.nl/disclaimer>
>
> This e-mail and its contents are subject to a DISCLAIMER with important RESERVATIONS: see http://www.t-mobile.nl/disclaimer <http://www.t-mobile.nl/disclaimer>
>
>
> ********************************************************************************


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]