redhat 3.4 on ibm 336

Tue Apr 4 18:14:37 UTC 2006

  You do not have enough RAM to install Red Hat Enterprise Linux on this 
machine

but when i install 4.2 it goes fine.
this box has 4 Gigs of ram
here is the post

sending termination signals...done
sending kill signals...done
disabling swap...
unmounting filesystems...
/proc done
/dev/pts done
/tmp/ramfs done
rebooting system
Restarting system.
Linux version 2.6.9-22.EL (bhcompile at porky.build.redhat.com) (gcc 
version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Mon Sep 19 18:20:28 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c7fcda80 (usable)
BIOS-e820: 00000000c7fcda80 - 00000000c7fd0000 (ACPI data)
BIOS-e820: 00000000c7fd0000 - 00000000c8000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
zapping low mappings.
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x588
Built 1 zonelists
Kernel command line: console=tty0 console=ttyS0,9600 ksdevice=eth0 
initrd=initrd.img network 
ks=http://192.168.67.151/tftpboot/install/ks.cfg.3.4 BOOT_IMAGE=vmlinuz
Initializing CPU#0
CPU 0 irqstacks, hard=c03e5000 soft=c03e4000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2801.510 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3235960k/4194304k available (2111k kernel code, 39744k reserved, 
667k data, 144k init, 2359092k highmem)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an 
initrd
Freeing initrd memory: 2478k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd75e, last bus=7
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LP00] (IRQs *11)
ACPI: PCI Interrupt Link [LP01] (IRQs *3)
ACPI: PCI Interrupt Link [LP02] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP03] (IRQs *3)
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP07] (IRQs *5)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LP00] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LP03] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LP07] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:1f.2[A]: no GSI
ACPI: PCI Interrupt Link [LP01] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1144152563.461:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 975E6FA84E049D8A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU3] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
▒ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: HL-DT-STDVD-ROM GDR8083N, ATAPI CD/DVD-ROM drive
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
ACPI wakeup devices:
PCI0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Greetings.
Red Hat install init version 9.1.4.1 starting
mounting /proc filesystem... done
mounting /dev/pts (unix98 pty) filesystem... done
Red Hat install init version 9.1.4.1 using a serial console
remember, cereal is an important part of a nutritionally balanced breakfast.

trying to remount root filesystem read write... done
mounting /tmp as ramfs... done
running install...
running /sbin/loader
Welcome to Red Hat Enterprise Linux

-- 
--
Steve Rieger
310-339-4355      (cell)
3394355 at gmail.com (pager)
http://fhs.lyon.k12.nv.us/steve%20rieger.htm