[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Getting Multiple Ips Up...



On Thu, 7 Jun 2001, Marcus Ouimet wrote:

> 	I have tried to get several Ips up on my server I managed to get
> two of them up no problem by copying the script for ifcfg-eth0 to
> ifcfg-eth1, ifcfg-eth2, etc. The ones after the first two just just do:
> Delaying eth2 initialization, etc. When using ifup ifcfg-eth2. OR fail
> on restarting the network. I changed the IP address in it as well as the
> first line in the script to correspond with the file ie:
>
> ifcfg-eth2 would be:
>
> DEVICE="eth2"
> IPADDR="216.97.33.28"
> NETMASK="255.255.255.0"
> ONBOOT="yes"
> BOOTPROTO="none"
> IPXNETNUM_802_2=""
> IPXPRIMARY_802_2="no"
> IPXACTIVE_802_2="no"
> IPXNETNUM_802_3=""
> IPXPRIMARY_802_3="no"
> IPXACTIVE_802_3="no"
> IPXNETNUM_ETHERII=""
> IPXPRIMARY_ETHERII="no"
> IPXACTIVE_ETHERII="no"
> IPXNETNUM_SNAP=""
> IPXPRIMARY_SNAP="no"
> IPXACTIVE_SNAP="no"
>
> Contacted my ISP and they said there shouldn't be a problem? Any
> ideas...
>
>
You are using the wrong format for more then one IP on an interface.
You want to name them eth0:0, eth0:1, eth0:2, etc if they are all
aliases of eth0.  Normaly, eth1, eth2, etc are different physical NICs.

-- 

    Do not meddle in the affairs of dragons,
 for you are crunchy and taste good with ketchup.





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]