SNMP monitoring HP Netraid card

[Michael Gargiullo]

Trying to set up our HP Netserver LH 3r for RAID monitoring via SNMP. 
Server uses HP netraid controller (megaraid driver) and runs Enterprise ES 3. 
I have enclosed output of lspci and lsmod for your inspection. Has anyone had any experience in getting these to report correctly? 
 
[root at dns2 root]# lspci 
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP 
disabled) (rev 03) 
00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 
00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 
00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 
00:07.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 
05)00:07.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 05) 
00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 
00:0b.0 System peripheral: Hewlett-Packard Company NetServer Smart IRQ Router 
(rev a0) 
00:0d.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) 
01:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c) 
01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) 
 
[root at dns2 root]# lsmod 
Module                  Size  Used by    Not tainted 
ide-cd                 35680   0  (autoclean) 
cdrom                  33696   0  (autoclean) [ide-cd] 
autofs                 13364   0  (autoclean) (unused) 
e100                   56164   1 
floppy                 58160   0  (autoclean) 
sg                     36972   0  (autoclean) 
microcode               4724   0  (autoclean) 
ext3                   88104   2 
jbd                    52464   2  [ext3] 
sym53c8xx              68208   0 
megaraid               30660   3 
sd_mod                 13744   6 
scsi_mod              109480   4  [sg sym53c8xx megaraid sd_mod]