Gigabit ethernet

[Stephane Branchoux]

Hello,

I use  2.6.9-34.0.2.ELsmp kernel on a Red Hat Enterprise Linux AS 
release 4 box.

# lspci |grep -i ethernet
02:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet 
Controller (rev 03)

Eth1 card is connected on a 2950 cisco switch (on a giga port RJ45, 
speed 1000 and duplex full ).

When i use :

ethtool -s eth1 speed 1000  duplex full autoneg off, then mii-tool -v 
gives me :

eth1: negotiated, link ok
  product info: vendor 00:50:43, model 2 rev 5
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

How to activate 1000baseTx-FD ?

Many thanks in advance.

-- 
stephane BRANCHOUX
Centre de Ressources Informatiques de l'Université de Perpignan.
Systèmes/Réseaux
mailto:stephane.branchoux at univ-perp.fr
04 68 66 21 24
Validation signature / Trusting signature: http://igc.cru.fr/trust.html


-- 
Ce message a ete verifie par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a ete trouve.
CRI Université de Perpignan