Problem with sdlt drive

[Bliss, Aaron]

I'm having trouble getting a redhat 3 ES server to load the driver for a
compaq sdlt 320 drive.  I know that the drive works fine.  The drive is
using scsi ID 6, the bios sees and correctly identifies the drive.  This
box also has an hba card installed and working properly.  Here is the
contents of /proc/scsi/scsi
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 3010
  Type:   Unknown                          ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 01
  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 2001
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 3010
  Type:   Unknown                          ANSI SCSI revision: 02

Any ideas?  Thanks very much.

www.preferredcare.org
"An Outstanding Member Experience," Preferred Care HMO Plans -- J. D. Power and Associates

Confidentiality Notice:
The information contained in this electronic message is intended for the exclusive use of the individual or entity named above and may contain privileged or confidential information.  If the reader of this message is not the intended recipient or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that dissemination, distribution or copying of this information is prohibited.  If you have received this communication in error, please notify the sender immediately by telephone and destroy the copies you received.