mt refuses to report location on the tape
Anthony Reynolds
rar at ctscan.co.uk
Sun Jul 22 20:35:19 UTC 2007
Dear All,
This is a follow-on to a previous posting as we have encountered the exact
same problem with RHEL ES4:
We attached a Quantum 8000 DLT to an Adaptec 39320A SCSI controller - the
tape drive works fine, tar works fine and most of the mt commands work fine
except
mt -f /dev/nst0 tell
which comes back with "no such device".
Everything works fine on an older RH Linux system.
If anyone knows the solution to this problem on RHEL 4 we'd be very
grateful.
Kind regards
Anthony Reynolds
Image Diagnostic Technology Ltd
London, England
====================================================
Date: Fri, 17 Jun 2005 11:24:14 -0500
To: redhat-list at redhat.com
I have a RHEL WS 4 Update 1 machine with a DLT drive attached. A user
wants to use it, but is encountering some weird behavior from mt.
The device shows up in dmesg, the module is loaded, and /dev/st0 and
/dev/nst0 exist. tar -tvf will successfully list the contents of a tape
in the drive. However, 'mt -f /dev/nst0 tell' fails with 'no such
device'. Normally I would suspect that the tape drive doesn't have this
capability, but this command worked just fine with the machine's former
Redhat 7.2 install. mt's other functions, including rewind, etc. appear
to be working fine.
Any ideas?
-Mindy
====================================================
More information about the redhat-list
mailing list