[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: Adaptec SCSI RAID 2000S



Hi.

I checked Adaptec's site first thing, but no luck (unless you want to
install Windows or SUSE).

A bit of research told me that I *should* be able to use the i2o driver
for it, and I've gotten it as far as installing.  But somehow the grub
bootloader doesn't work.

I found http://i2o.shadowconnect.com/rhel.php but after following those
instructions I'm still at a point where, on bootup, I only get the word
'GRUB' on the screen and that's it.

I believe the i2o driver, which I manually specified during the install
with 'linux noprobe' etc. etc. doesn't load up again after a reboot, for
some reason.

Still working on it, but any suggestions will be appreciated!

Thank you.

-----Original Message-----
From: redhat-list-bounces redhat com
[mailto:redhat-list-bounces redhat com] On Behalf Of Andrew Bacchi
Sent: 19 October 2007 16:41
To: General Red Hat Linux discussion list
Subject: Re: Adaptec SCSI RAID 2000S

I hope you've already solved this problem.  Have you checked the Adaptec
web site for a Linux driver?  If anyone has one, it would be the OEM.


Johan Booysen wrote:
> I urgently need advice on this:  I need to install RHEL5 on a server
> that is probably about 4 years old.  It contains an Adaptec SCSI RAID
> 2000S adapter, and there is no driver available that I can track down
on
> short notice (and none included on the RHEL5 discs).  Anaconda does
not
> detect any disks on the server during installation.
>  
> Anyone know what my best bet is to get around this, or where to find a
> driver that will work?
>  
> Thanks very much.
>  
> Johan

-- 

veritatis simplex oratio est
		-Seneca

Andrew Bacchi
Systems Programmer
Rensselaer Polytechnic Institute
phone: 518.276.6415  fax: 518.276.2809

http://www.rpi.edu/~bacchi/

-- 

redhat-list mailing list
unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]