[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: bonding - failed to get speed of NIC ?



Does this happen while not doing NIC bonding?  It looks like a NIC problem not a nic-bonding issue, maybe a drive issue.  (emulex or Qlogic)




________________________________
From: William Reich <reich ulticom com>
To: General Red Hat Linux discussion list <redhat-list redhat com>
Sent: Monday, August 31, 2009 3:19:36 PM
Subject: bonding - failed to get speed of NIC ?


I have a system setup with IP bonding.
The NIC cards are 1gig,
but sometimes, not always, I get this error ( below )
which makes the NICs into 100Mbps.
( observed on the RH 4 Update 4 system. )

Anybody know why ?

wr

++++++++


Aug 25 14:05:55 jazz kernel: bonding: Warning: failed to get
speed/duplex from eth3, speed forced to 100Mbps, duplex forced to Full.
Aug 25 14:05:55 jazz kernel: bonding: bond0: making interface eth3 the
new active one.
Aug 25 14:05:55 jazz kernel: bonding: bond0: enslaving eth3 as an active
interface with an up link.
...
Aug 25 14:05:55 jazz ifup: Enslaving eth4 to bond0
Aug 25 14:05:55 jazz kernel: bonding: Warning: failed to get
speed/duplex from eth4, speed forced to 100Mbps, duplex forced to Full.
Aug 25 14:05:55 jazz kernel: bonding: bond0: enslaving eth4 as a backup
interface with an up link.

-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



      

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]