[rhelv6-list] rdblacklist during install persists into installed system

[Brandon Sawyers]

I'm not sure about rdblacklist, but I use blacklist=qla2xxx and it adds a
line in /etc/modprobe.d/anaconda.conf.

Double check there?

Do those two options work differently?

Hope this helps.


On Wed, Jun 26, 2013 at 8:46 AM, Gianluca Cecchi
<gianluca.cecchi at gmail.com>wrote:

> Hello,
> during install of rh el 6.3 I want to blacklist my san devices.
> So I use the new option in 6.x anaconda
>
> rdblacklist=qla2xxx
>
> that works ok.
> But I see that it understands I want to blacklist it forever, also on
> the installed system.
> In fact the qla2xxx module is not automatically loaded, even if I have
> multipathd enabled.
>
> I can manually load the module after boot and then see my san disks
> correctly assembled by multipath daemon.
>
> It seems no particular option is in neither grub.conf or modprobe.conf
> or modprobe.d directory.
> Any file to modify to re-enable this automatic loading before
> re-creating initramfs file (if necessary at all, as I see the qla2xxx
> is indeed in initramfs file)?
>
> Thanks in advance,
> Gianluca
>
> _______________________________________________
> rhelv6-list mailing list
> rhelv6-list at redhat.com
> https://www.redhat.com/mailman/listinfo/rhelv6-list
>



-- 
Brandon Sawyers
Systems Engineer
NIS & Systems Support
bsawyers at vt.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rhelv6-list/attachments/20130626/aa9e2813/attachment.htm>