[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: Newest kernel Fedora (2.6.21-1.3194.fc7) killed ndiswrapper



In order to this, I have to read my e-mail in the old kernel, reboot, try the stuff in the new kernel, and then boot back to the old kernel so I can see e-mail agin. Since I sent you my last question, I went ahead and made a copy of the whole dmesg file as well as the message file. The reason I did the later is that when I try to add the ndiswrapper stuff on the fly, the dmesg file does not change but the messages file does.

So, here goes...teh first section you will see are teh lines from the dmesg file that seem to pertain to ndiswrapper. The next section is the /var/log/dmesg file as it appears during a boot in teh bad kernel.

Does any of this help?

Thanks for the help!

Arch

/var/log/messages
May 28 12:38:03 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:38:03 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:38:03 localhost kernel: Zone PFN ranges:
May 28 12:38:03 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:38:03 localhost kernel:   DMA             0 ->     4096
May 28 12:38:03 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:38:03 localhost kernel:   Normal       4096 ->   128979
May 28 12:38:03 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
.
.
.
.
.
.
May 28 12:40:35 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:40:35 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:40:35 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:40:41 localhost kernel: pccard: CardBus card inserted into slot 0
May 28 12:40:53 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:40:54 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:40:54 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:42:02 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:42:02 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:42:47 localhost system-config-network[4780]: -+ //etc/modprobe.conf 	eth0 alias e100
May 28 12:42:47 localhost system-config-network[4780]: chmod 0644 //etc/sysconfig/networking/devices/ifcfg-eth0
May 28 12:42:47 localhost system-config-network[4780]: chmod 0644 //etc/sysconfig/networking/devices/ifcfg-wlan0
May 28 12:43:30 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:43:31 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:43:31 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:43:57 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init
May 28 12:43:57 localhost modprobe: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) 
May 28 12:43:58 localhost kernel: ndiswrapper: Unknown symbol __spin_lock_init


Linux version 2.6.21-1.3194.fc7 (kojibuilder xenbuilder4 fedora phx redhat com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001f6d3800 end: 000000001f7d3800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001f7d3800 size: 000000000082c800 end: 0000000020000000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end: 00000000f0007000 type: 2
copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
copy_e820_map() start: 00000000fed20000 size: 00000000000f0000 end: 00000000fee10000 type: 2
copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
 BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
 BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
503MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 128979) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   128979
  HighMem    128979 ->   128979
early_node_map[1] active PFN ranges
    0:        0 ->   128979
On node 0 totalpages: 128979
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 975 pages used for memmap
  Normal zone: 123908 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
ACPI: RSDT 1F7D4425, 0038 (r1 DELL    CPi R   27D50C01 ASL        61)
ACPI: FACP 1F7D4C00, 0074 (r1 DELL    CPi R   27D50C01 ASL        61)
ACPI: DSDT 1F7D5800, 2D9A (r1 INT430 SYSFexxx     1001 MSFT  100000E)
ACPI: FACS 1F7E4000, 0040
ACPI: APIC 1F7D5400, 0068 (r1 DELL    CPi R   27D50C01 ASL        47)
ACPI: MCFG 1F7D53C0, 003E (r16 DELL    CPi R   27D50C01 ASL        61)
ACPI: SSDT 1F7D4658, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
ACPI: SSDT 1F7D445D, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Built 1 zonelists.  Total pages: 127972
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c077c000 soft=c075c000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1496.322 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 503064k/515916k available (2066k kernel code, 12232k reserved, 1092k data, 240k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
    lowmem  : 0xc0000000 - 0xdf7d3000   ( 503 MB)
      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2994.57 BogoMIPS (lpj=1497289)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
Total of 1 processors activated (2994.57 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
Time: 12:37:10  Date: 04/28/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
pnp: 00:02: ioport range 0x1008-0x100f has been reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:03: ioport range 0x1060-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
pnp: 00:08: ioport range 0x900-0x90f has been reserved
pnp: 00:08: ioport range 0x910-0x91f has been reserved
pnp: 00:08: ioport range 0x920-0x92f has been reserved
pnp: 00:08: ioport range 0x930-0x93f has been reserved
pnp: 00:08: ioport range 0x940-0x97f has been reserved
pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved
pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved
pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved
pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved
pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved
pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved
pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved
pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved
Time: tsc clocksource has been installed.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:01.0
  IO window: 0000d000-0000d0ff
  IO window: 0000d400-0000d4ff
  PREFETCH window: 30000000-33ffffff
  MEM window: 34000000-37ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: 30000000-33ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3488k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1180355830.189:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 65F8109C338BBD41
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THM] (62 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:02:01.0 [1028:01a4]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x00001002, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000007
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 7:949:633
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 820k
Clocksource tsc unstable (delta = -382601195 ns)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.20 loaded.
ata_piix 0000:00:1f.1: version 2.10ac1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
scsi0 : ata_piix
ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
ata1.00: ATA-6: ST9408114A, 8.03, max UDMA/100
ata1.00: 78140160 sectors, multi 8: LBA48 
ata1.01: ATAPI, max UDMA/33
ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi1 : ata_piix
ata2: port disabled. ignoring.
scsi 0:0:0:0: Direct-Access     ATA      ST9408114A       8.03 PQ: 0 ANSI: 5
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: CD-ROM            HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel redhat com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
security:  60 classes, 65638 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1180355839.218:2): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 5
Floppy drive(s): fd0 is 1.44M
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff:<3>intel_rng: FWH not detected
 clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
input: PC Speaker as /class/input/input3
iTCO_vendor_support: vendor-support=0
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
e100: eth0: e100_probe: addr 0xdfdff000, irq 20, MAC addr 00:12:3F:F5:1F:BD
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 50324 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1e.3 to 64
MC'97 1 converters and GPIO not ready (0xff00)
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
 [<c042b0cf>] local_bh_enable+0x45/0x92
 [<c06002bd>] cond_resched_softirq+0x2c/0x42
 [<c059adf3>] release_sock+0x4f/0x9d
 [<c05c670d>] tcp_sendmsg+0x90b/0x9f9
 [<c05dec95>] inet_sendmsg+0x3b/0x45
 [<c0598731>] sock_aio_write+0xf6/0x102
 [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
 [<c0436e71>] autoremove_wake_function+0x0/0x35
 [<c0475b33>] do_readv_writev+0xbc/0x187
 [<c059863b>] sock_aio_write+0x0/0x102
 [<c0475c3b>] vfs_writev+0x3d/0x48
 [<c04760a4>] sys_writev+0x41/0x95
 [<c0404f70>] syscall_call+0x7/0xb
 =======================
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
No dock devices found.
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SBTN]
ibm_acpi: ec object not found
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1015800k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1015800k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts


-----Original Message-----
From: fedora-test-list-bounces redhat com on behalf of Chris Brown
Sent: Mon 5/28/2007 12:42 PM
To: For testers of Fedora Core development releases
Subject: Re: Newest kernel Fedora (2.6.21-1.3194.fc7) killed ndiswrapper
 
On 28/05/07, Arch Willingham <arch tuparks com> wrote:
>
> Stupid question:....I did a man insmod but what's insmod? Am I supposed to
> run it?
>

Sorry Arch, insmod is the command to insert a module (in this case your
ndiswrapper.ko which is the ndiswrapper linux kernel module). You said

Note that of teh output below, there were only two new errors: "WARNING:
"__spin_lock_init" [/downloads/ndiswrapper-1.44/driver/ndiswrapper.ko]
undefined!" and "FATAL: Error inserting ndiswrapper (/lib/modules/2.6.21-
1.3194.fc7/misc/ndiswrapper.ko): Unknown symbol in module, or unknown
parameter (see dmesg)"

so it would be good to see what dmesg says. There are 'other' repositories
that hold ndiswrapper and you will probably want to use these rather than
compiling from source when f7 is released. Anyway, if you try to load
ndiswrapper again and then as and when it fails post back the output of:

dmesg | tail -n 20

Cheers
Chris

-- 
http://www.chruz.com





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]