[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Anyone have an ATI X800XL that displays properly?



Michael Wiktowy wrote:
I have an ASUS A7N8X mobo with an NForce2 chipset and a Samsung Syncmaster 900p CRT. I just got an ATI X800XL AGP8X thinking that it would work in FC4 and I can only get it to display 2D X in eye-bleeding VESA mode after going through all the diagnostic steps triggered when X won't start. There was no X800XL listed and picking the other X800s didn't work.

I tried the fglrx driver from livna too but that seems to drive my monitor out of spec eventhough it looks like the Hsync and Vsync are correct in my xorg.conf

If you have this or a close configuration working, please post your xorg.conf as this 60 Hz refresh is driving me nuts.

Thanks,
/Mike


Hi Mike,

I have an ATI X800XL (PCIE not AGP) and I also had trouble finding the right mix. I will just give you my xorg.conf, so you can judge for yourself. You do have to change the frequencies for your monitor though, before you try it.

Hope it helps.

Guus.
--
A.J. Bonnema, Leiden The Netherlands,
user #328198 (Linux Counter http://counter.li.org)

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Belinea10171"
	DisplaySize  340	270
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 83.0 <----------- Change this
	VertRefresh  50.0 - 77.0 <----------- And this
	Option	    "dpms"
EndSection

Section "Device"

#	Driver      "vesa"
#	BoardName   "Vesacard (generic)"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Technologies Inc R430 [Radeon X800 XL] (PCIe)"
	Option	    "DDCMode" "On"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]