[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

gedit /etc/X11/xorg.conf (SUSE 10)



I'm new to Linux. I followed Stan Finley Linux Instruction Notes. When I was at the “gedit /etc/X11/org.conf”, I email Asus support for display specs. The only change I felt at ease with changing, was (Modes 1280x768) for my wide screen laptop. Another option I have is to use SUSE 10.0 settings which I have listed below. Would this be compatible with Fedora? I like Fedora better.
Any other suggestions from the community would be appreciated.
Thanks, Dennis
denniscastanos yahoo com

Dennis
You may need to get out your calculator, and line up the columns but I pulled these numbers from the LCD spec. sheet.
Thanks.
Sincerely,
Albert
ASUS Notebook Support ACI


--------

8.0 Interface Timings
Basically, interface timings should match the VESA 1024x768 /60Hz
(VG901101) manufacturing guide line timing.
8.1 Timing Characteristics
Symbol Description Min Typ Max Unit
DOTCLK DOTCLK Frequency (TBD) 71.1 (TBD) [MHz]
TCLOCK DOTCLK cycle time (TBD) 14.06 (TBD) [nsec]
TH X total time ¾ 1440 ¾ [tck]
THD X active time ¾ 1280 ¾ [tck]
THB X blank time ¾ 160 ¾ [tck]
TV Y total time ¾ 823 ¾ [tx]
TVD Y active time ¾ 768 ¾ [tx]
Vsync Frame rate ¾ 60 ¾ [Hz]
Note: DE mode


gedit /etc/X11/xorg.conf (Fedora)
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x800"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 90.0
VertRefresh 60.0 - 60.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc M24 1P [Radeon Mobility X600]"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x768"
EndSubSection
EndSection



SUSE 10 (gedit /etc/X11/xorg.conf)
Section "Monitor"
HorizSync 30-50
Identifier "Monitor[0]"
ModelName "1280X768 60HZ"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 50-65
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x768" 84.35 1280 1344 1480 1680 768 769 772 797
Modeline "1024x768" 67.48 1024 1080 1184 1344 768 769 772 797
Modeline "800x600" 40.19 800 832 912 1024 600 601 604 623
Modeline "768x576" 37.37 768 800 880 992 576 577 580 598
Modeline "640x480" 25.10 640 656 720 800 480 481 484 498
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.
[
Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]