[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Boot fails after change of motherboard (using LVM)



on 10/13/2006 1:43 PM Paul Howarth said the following:
On Fri, 2006-10-13 at 09:21 -0400, Volker Englisch wrote:
On 10/13/2006 04:01 AM Paul Howarth wrote:
Once you've found the sata modules in use, edit the /etc/modprobe.conf
of the installed system to ensure that it has a scsi_hostadapter line
for each sata module. For instance, I have:

alias scsi_hostadapter sata_sil24
alias scsi_hostadapter1 sata_nv
I have two identical SATA disks.  Would I need to enter
   alias scsi_hostadapter sata_via

to the modprobe.conf or
   alias scsi_hostadapter sata_via
   alias scsi_hostadapter1_sata_via

You only need the one. If it's already there then this is not the
problem you're having.

Sorry, but I want to make sure I understand correctly.
Are you saying if I already see the sata_via module with the lsmod command I do not need the entry in the /etc/modprobe.conf?
Or did you mean I only need one single line
   alias scsi_hostadapter sata_via
in /etc/modprobe.conf because I have two identical HDs?
I have currently nothing in the modprobe.conf file regarding the SATA drives.

Volker


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]