[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Oopses with kernel 2.6.17-1.2174_FC5



Hello

I'm having strange problems, kernel oopses many times in a day, it used to be 
stable but after yum update (Oct 20) it started to oops.

Four recorded oopses attached.

If this some known problem of is this just me?

Best Regards
Kimmo Koivisto
Linux version 2.6.17-1.2174_FC5 (brewbuilder hs20-bc2-3 build redhat com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Tue Aug 8 15:30:55 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI 2.2 present.
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8 console=tty0
Found and enabled local APIC!
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c075c000 soft=c075b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1670.785 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514312k/524224k available (2068k kernel code, 9324k reserved, 1127k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3344.65 BogoMIPS (lpj=6689305)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1e20)
checking if image is initramfs... it is
Freeing initrd memory: 910k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162237489.752:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 159031EDF350496D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (56 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP8004H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Yenta: CardBus bridge found at 0000:00:0a.0 [1154:030a]
Yenta: ISA IRQ mask 0x0000, PCI irq 12
Socket status: 30000810
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 662 not supported
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1162237498.600:2): selinux=0 auid=4294967295
audit(1162230316.215:3): audit_pid=1855 old=0 by auid=4294967295
BUG: unable to handle kernel paging request at virtual address f1978480
 printing eip:
c05a90b7
*pde = 00000000
Oops: 0002 [#1]
last sysfs file: /class/drm/card0/dev
Modules linked in: radeon drm ipv6 autofs4 hidp rfcomm l2cap bluetooth arc4 ieee80211_crypt_wep dm_mirror dm_mod video button battery ac lp parport_pc parport floppy bt878 snd_bt87x tuner tvaudio msp3400 snd_seq_dummy snd_seq_oss snd_seq_midi_event orinoco_cs orinoco hermes snd_via82xx snd_seq hostap_cs gameport snd_pcm_oss snd_mixer_oss hostap snd_ac97_codec snd_ac97_bus snd_mpu401_uart snd_pcm bttv dvb_ttpci l64781 saa7146_vv saa7146 v4l1_compat ves1820 stv0299 i2c_viapro ieee80211_crypt snd_rawmidi snd_seq_device snd_timer video_buf ir_common compat_ioctl32 dvb_core tda8083 stv0297 ohci1394 via_ircc snd i2c_algo_bit sp8870 ves1x93 ttpci_eeprom ieee1394 serio_raw irda ehci_hcd uhci_hcd v4l2_common btcx_risc tveeprom videodev via_rhine mii crc_ccitt snd_page_alloc i2c_core soundcore ext3 jbd
CPU:    0
EIP:    0060:[<c05a90b7>]    Not tainted VLI
EFLAGS: 00210282   (2.6.17-1.2174_FC5 #1) 
EIP is at skb_copy+0x3c/0xc5
eax: c9eb1a80   ebx: c9eb1a80   ecx: 00000000   edx: 00000000
esi: c787d824   edi: c52d8000   ebp: 000000d6   esp: d1fbbbd8
ds: 007b   es: 007b   ss: 0068
Process kio_http (pid: 21866, threadinfo=d1fbb000 task=d410c000)
Stack: 00000000 dd727400 0000001e d1fbbc44 c787d824 e0a02ae1 00000000 c14bdc00 
       c9eb1a80 d1fbbc26 dd7276c0 dcf743a4 00000000 08000246 00000000 e0a1b7d2 
       00000018 00000006 0000000c 01081a80 09000000 aff6f65b 00db0400 0900610d 
Call Trace:
 <e0a02ae1> hostap_data_start_xmit+0x4dd/0x648 [hostap]  <c05ac38d> dev_hard_start_xmit+0x1a1/0x1fa
 <c05adc58> dev_queue_xmit+0x178/0x20c  <c05ca8df> ip_output+0x1bf/0x1f8
 <e088fa6c> dx_probe+0x95/0x2d8 [ext3]  <c05ca130> ip_queue_xmit+0x397/0x3cd
 <e0890783> ext3_find_entry+0x25f/0x58d [ext3]  <e0830c21> do_get_write_access+0x4e8/0x502 [jbd]
 <c05dc0a5> tcp_v4_send_check+0x82/0xc7  <c05d7481> tcp_transmit_skb+0x5d9/0x607
 <c04186cb> try_to_wake_up+0xe9/0xf3  <c05d8d7d> __tcp_push_pending_frames+0x6bc/0x783
 <c05a8534> __alloc_skb+0x4f/0xf5  <c05cfad8> tcp_sendmsg+0x8fe/0x9f6
 <c042c17c> autoremove_wake_function+0x0/0x35  <c05e6536> inet_sendmsg+0x3b/0x45
 <c05a2502> do_sock_write+0xaa/0xb1  <c05a29a8> sock_aio_write+0x5e/0x6a
 <c045bc3d> do_sync_write+0xc3/0xfd  <c042c17c> autoremove_wake_function+0x0/0x35
 <c043ccf4> audit_syscall_entry+0x104/0x12b  <c045c537> vfs_write+0xbc/0x150
 <c045ca57> sys_write+0x41/0x67  <c0402cb3> syscall_call+0x7/0xb
Code: 8b a8 98 00 00 00 8b 80 a0 00 00 00 29 f8 03 46 64 e8 43 f4 ff ff 85 c0 89 c3 0f 84 8b 00 00 00 29 fd 8b 56 60 01 a8 98 00 00 00 <89> e8 03 83 9c 00 00 00 89 ef 83 7b 64 00 89 83 9c 00 00 00 74 
EIP: [<c05a90b7>] skb_copy+0x3c/0xc5 SS:ESP 0068:d1fbbbd8
 <0>Kernel panic - not syncing: Fatal exception in interrupt
 <6>wifi0: SW TICK stuck? bits=0x0 EvStat=8001 IntEn=e018
Linux version 2.6.17-1.2174_FC5 (brewbuilder hs20-bc2-3 build redhat com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Tue Aug 8 15:30:55 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI 2.2 present.
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8 console=tty0
Found and enabled local APIC!
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c075c000 soft=c075b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1670.785 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514312k/524224k available (2068k kernel code, 9324k reserved, 1127k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3344.64 BogoMIPS (lpj=6689291)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1e20)
checking if image is initramfs... it is
Freeing initrd memory: 910k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162239027.524:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 159031EDF350496D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (55 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP8004H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Yenta: CardBus bridge found at 0000:00:0a.0 [1154:030a]
Yenta: ISA IRQ mask 0x0000, PCI irq 12
Socket status: 30000810
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 662 not supported
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
EXT3-fs: hda1: 9 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1162239037.492:2): selinux=0 auid=4294967295
audit(1162231859.033:3): audit_pid=1874 old=0 by auid=4294967295
BUG: unable to handle kernel paging request at virtual address e3000246
 printing eip:
c0600b11
*pde = 00000000
Oops: 0000 [#1]
last sysfs file: /class/drm/card0/dev
Modules linked in: radeon drm ipv6 autofs4 hidp rfcomm l2cap bluetooth arc4 ieee80211_crypt_wep dm_mirror dm_mod video button battery ac lp parport_pc parport floppy bt878 snd_bt87x dvb_ttpci l64781 tuner saa7146_vv tvaudio snd_via82xx gameport saa7146 v4l1_compat orinoco_cs msp3400 snd_ac97_codec ves1820 orinoco hermes stv0299 snd_ac97_bus bttv video_buf hostap_cs snd_seq_dummy dvb_core tda8083 ir_common compat_ioctl32 i2c_algo_bit hostap snd_seq_oss snd_seq_midi_event snd_seq stv0297 sp8870 ves1x93 ttpci_eeprom v4l2_common btcx_risc i2c_viapro ieee80211_crypt snd_mpu401_uart snd_pcm_oss snd_mixer_oss tveeprom i2c_core videodev snd_rawmidi snd_pcm ehci_hcd serio_raw snd_seq_device via_rhine mii uhci_hcd snd_timer snd_page_alloc ohci1394 via_ircc snd ieee1394 soundcore irda crc_ccitt ext3 jbd
CPU:    0
EIP:    0060:[<c0600b11>]    Not tainted VLI
EFLAGS: 00010283   (2.6.17-1.2174_FC5 #1) 
EIP is at cond_resched+0x1/0x30
eax: e3000246   ebx: c7d98e3c   ecx: 00000000   edx: 000005b8
esi: 00e48112   edi: dfcfd400   ebp: 000001c9   esp: d2cd4e34
ds: 007b   es: 007b   ss: 0068
Process captmon2 (pid: 22575, threadinfo=d2cd4000 task=d62ceaa0)
Stack: c045dbe8 00001000 00000005 00000018 00e4800a 00000000 dfdb1040 de7d088c 
       00001000 00e48112 dfcfd400 000001c9 e088b634 00001000 dfcfd458 d2cd4ea8 
       c042f6b2 d2cd4ea8 dfcfd46c 00000000 dc3a04e4 00000001 d2cd4ef4 de8c536c 
Call Trace:
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
Code: b1 a7 e1 ff eb 0a b8 20 94 76 c0 e8 f2 1f 00 00 b8 00 f0 ff ff 21 e0 8b 40 08 a8 08 0f 85 d9 fa ff ff 8d 65 f4 5b 5e 5f 5d c3 55 <ba> 00 f0 ff ff 21 e2 8b 42 08 89 e5 a8 08 74 0f 83 7a 14 00 75 
EIP: [<c0600b11>] cond_resched+0x1/0x30 SS:ESP 0068:d2cd4e34
 <3>BUG: sleeping function called from invalid context at include/linux/rwsem.h:43
in_atomic():0, irqs_disabled():1
 <c0426d91> blocking_notifier_call_chain+0x18/0x49  <c0600068> packet_rcv+0x221/0x2dd
 <c041e800> do_exit+0x19/0x768  <c0529103> do_unblank_screen+0x2a/0x127
 <c0600068> packet_rcv+0x221/0x2dd  <c0600068> packet_rcv+0x221/0x2dd
 <c04042c0> die+0x27b/0x2a0  <c060370b> do_page_fault+0x0/0x5ad
 <c0603b4e> do_page_fault+0x443/0x5ad  <c060370b> do_page_fault+0x0/0x5ad
 <c04037df> error_code+0x4f/0x54  <c0600b11> cond_resched+0x1/0x30
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
BUG: warning at kernel/exit.c:855/do_exit() (Not tainted)
 <c041e83c> do_exit+0x55/0x768  <c0600068> packet_rcv+0x221/0x2dd
 <c0600068> packet_rcv+0x221/0x2dd  <c04042c0> die+0x27b/0x2a0
 <c060370b> do_page_fault+0x0/0x5ad  <c0603b4e> do_page_fault+0x443/0x5ad
 <c060370b> do_page_fault+0x0/0x5ad  <c04037df> error_code+0x4f/0x54
 <c0600b11> cond_resched+0x1/0x30  <c045dbe8> __getblk+0x39/0x255
 <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]  <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c
 <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]  <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]
 <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]  <e08919f2> ext3_unlink+0x13e/0x18c [ext3]
 <c0468ab6> vfs_unlink+0xa5/0xdf  <c046a5db> do_unlinkat+0x90/0x124
 <c0405a04> do_syscall_trace+0x126/0x16d  <c0402cb3> syscall_call+0x7/0xb
BUG: captmon2/22575, lock held at task exit time!
 [da075bdc] {inode_init_once}
.. held by:          captmon2:22575 [d62ceaa0, 125]
... acquired at:               do_unlinkat+0x5a/0x124
Linux version 2.6.17-1.2174_FC5 (brewbuilder hs20-bc2-3 build redhat com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Tue Aug 8 15:30:55 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI 2.2 present.
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8 console=tty0
Found and enabled local APIC!
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c075c000 soft=c075b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1670.763 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514312k/524224k available (2068k kernel code, 9324k reserved, 1127k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3344.65 BogoMIPS (lpj=6689301)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1e20)
checking if image is initramfs... it is
Freeing initrd memory: 910k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162246597.704:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 159031EDF350496D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (54 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP8004H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Yenta: CardBus bridge found at 0000:00:0a.0 [1154:030a]
Yenta: ISA IRQ mask 0x0000, PCI irq 12
Socket status: 30000810
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 662 not supported
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
EXT3-fs: hda1: 4 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1162246606.476:2): selinux=0 auid=4294967295
audit(1162239426.258:3): audit_pid=1904 old=0 by auid=4294967295
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c0600b11
*pde = 0f3fb067
Oops: 0002 [#1]
last sysfs file: /class/drm/card0/dev
Modules linked in: radeon drm ipv6 autofs4 hidp rfcomm l2cap bluetooth arc4 ieee80211_crypt_wep dm_mirror dm_mod video button battery ac lp parport_pc parport floppy bt878 tuner tvaudio msp3400 orinoco_cs dvb_ttpci orinoco l64781 hermes snd_bt87x bttv saa7146_vv snd_seq_dummy video_buf saa7146 snd_seq_oss ir_common i2c_viapro ehci_hcd hostap_cs snd_seq_midi_event v4l1_compat ves1820 stv0299 compat_ioctl32 i2c_algo_bit v4l2_common btcx_risc tveeprom snd_via82xx gameport via_ircc uhci_hcd ohci1394 hostap ieee80211_crypt snd_seq dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom ieee1394 serio_raw snd_pcm_oss i2c_core videodev snd_mixer_oss snd_ac97_codec snd_ac97_bus snd_mpu401_uart via_rhine mii irda crc_ccitt snd_pcm snd_rawmidi snd_seq_device snd_timer snd_page_alloc snd soundcore ext3 jbd
CPU:    0
EIP:    0060:[<c0600b11>]    Not tainted VLI
EFLAGS: 00010202   (2.6.17-1.2174_FC5 #1) 
EIP is at cond_resched+0x1/0x30
eax: 00000246   ebx: dea17378   ecx: 00000000   edx: 000005b8
esi: 00e48171   edi: dfcfd400   ebp: 000001c9   esp: d088ee30
ds: 007b   es: 007b   ss: 0068
Process captmon2 (pid: 28823, threadinfo=d088e000 task=d26b2550)
Stack: 00000000 c045dbe8 00001000 00000005 00000018 00e4800d 00000000 dfdb1040 
       def7f650 00001000 00e48171 dfcfd400 000001c9 e088b634 00001000 dfcfd458 
       d088eea8 c042f6b2 d088eea8 dfcfd46c 00000000 dc009240 00000001 d088eef4 
Call Trace:
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
Code: b1 a7 e1 ff eb 0a b8 20 94 76 c0 e8 f2 1f 00 00 b8 00 f0 ff ff 21 e0 8b 40 08 a8 08 0f 85 d9 fa ff ff 8d 65 f4 5b 5e 5f 5d c3 55 <ba> 00 f0 ff ff 21 e2 8b 42 08 89 e5 a8 08 74 0f 83 7a 14 00 75 
EIP: [<c0600b11>] cond_resched+0x1/0x30 SS:ESP 0068:d088ee30
 BUG: warning at kernel/exit.c:855/do_exit() (Not tainted)
 <c041e83c> do_exit+0x55/0x768  <c04042c0> die+0x27b/0x2a0
 <c0603b4e> do_page_fault+0x443/0x5ad  <c060370b> do_page_fault+0x0/0x5ad
 <c04037df> error_code+0x4f/0x54  <c0600b11> cond_resched+0x1/0x30
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
BUG: captmon2/28823, lock held at task exit time!
 [db708694] {inode_init_once}
.. held by:          captmon2:28823 [d26b2550, 125]
... acquired at:               do_unlinkat+0x5a/0x124
Linux version 2.6.17-1.2174_FC5 (brewbuilder hs20-bc2-3 build redhat com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Tue Aug 8 15:30:55 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI 2.2 present.
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8 console=tty0
Found and enabled local APIC!
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c075c000 soft=c075b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1670.785 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514312k/524224k available (2068k kernel code, 9324k reserved, 1127k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3344.73 BogoMIPS (lpj=6689473)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1e20)
checking if image is initramfs... it is
Freeing initrd memory: 910k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1162238423.736:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 159031EDF350496D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (52 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP8004H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
Yenta: CardBus bridge found at 0000:00:0a.0 [1154:030a]
Yenta: ISA IRQ mask 0x0000, PCI irq 12
Socket status: 30000810
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 662 not supported
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
pccard: PCMCIA card inserted into slot 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
EXT3-fs: hda1: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1162238432.260:2): selinux=0 auid=4294967295
audit(1162231248.456:3): audit_pid=1877 old=0 by auid=4294967295
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000438
 printing eip:
c0600b18
*pde = 06424067
Oops: 0000 [#1]
last sysfs file: /class/drm/card0/dev
Modules linked in: radeon drm ipv6 autofs4 hidp rfcomm l2cap bluetooth arc4 ieee80211_crypt_wep dm_mirror dm_mod video button battery ac lp parport_pc parport floppy bt878 snd_bt87x orinoco_cs orinoco hermes snd_via82xx tuner snd_seq_dummy gameport tvaudio snd_seq_oss snd_seq_midi_event msp3400 hostap_cs dvb_ttpci l64781 snd_seq snd_ac97_codec snd_ac97_bus snd_mpu401_uart snd_pcm_oss snd_mixer_oss snd_rawmidi hostap ohci1394 bttv i2c_viapro saa7146_vv uhci_hcd snd_pcm snd_seq_device ieee80211_crypt ieee1394 ehci_hcd ir_common compat_ioctl32 i2c_algo_bit via_ircc video_buf saa7146 v4l1_compat ves1820 stv0299 snd_timer snd serio_raw v4l2_common btcx_risc tveeprom videodev via_rhine mii soundcore irda crc_ccitt dvb_core snd_page_alloc tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom i2c_core ext3 jbd
CPU:    0
EIP:    0060:[<c0600b18>]    Not tainted VLI
EFLAGS: 00010206   (2.6.17-1.2174_FC5 #1) 
EIP is at cond_resched+0x8/0x30
eax: 00000246   ebx: dec5d788   ecx: 00000000   edx: 00000430
esi: 00e481a6   edi: dfcfc400   ebp: 000001c9   esp: d1b3ee30
ds: 007b   es: 007b   ss: 0068
Process captmon2 (pid: 28088, threadinfo=d1b3e000 task=cbb04aa0)
Stack: 000001c9 c045dbe8 00001000 00000005 00000018 00e4800f 00000000 dfdb0040 
       deeabb98 00001000 00e481a6 dfcfc400 000001c9 e088b634 00001000 dfcfc458 
       d1b3eea8 c042f6b2 d1b3eea8 dfcfc46c 00000000 dd18ff40 00000001 d1b3eef4 
Call Trace:
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
Code: 20 94 76 c0 e8 f2 1f 00 00 b8 00 f0 ff ff 21 e0 8b 40 08 a8 08 0f 85 d9 fa ff ff 8d 65 f4 5b 5e 5f 5d c3 55 ba 00 f0 ff ff 21 e2 <8b> 42 08 89 e5 a8 08 74 0f 83 7a 14 00 75 09 83 3d 10 80 75 c0 
EIP: [<c0600b18>] cond_resched+0x8/0x30 SS:ESP 0068:d1b3ee30
 BUG: warning at kernel/exit.c:855/do_exit() (Not tainted)
 <c041e83c> do_exit+0x55/0x768  <c04042c0> die+0x27b/0x2a0
 <c0603b4e> do_page_fault+0x443/0x5ad  <c060370b> do_page_fault+0x0/0x5ad
 <c04037df> error_code+0x4f/0x54  <c0600b18> cond_resched+0x8/0x30
 <c045dbe8> __getblk+0x39/0x255  <e088b634> __ext3_get_inode_loc+0x10a/0x2fb [ext3]
 <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c  <e088b856> ext3_reserve_inode_write+0x20/0x80 [ext3]
 <e0890bdc> ext3_orphan_add+0xf1/0x221 [ext3]  <e088b8ee> ext3_mark_inode_dirty+0x38/0x3f [ext3]
 <e08919f2> ext3_unlink+0x13e/0x18c [ext3]  <c0468ab6> vfs_unlink+0xa5/0xdf
 <c046a5db> do_unlinkat+0x90/0x124  <c0405a04> do_syscall_trace+0x126/0x16d
 <c0402cb3> syscall_call+0x7/0xb 
BUG: captmon2/28088, lock held at task exit time!
 [dbace3f0] {inode_init_once}
.. held by:          captmon2:28088 [cbb04aa0, 125]
... acquired at:               do_unlinkat+0x5a/0x124

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]