[rhn-users] Problem with HP DL380 G4 and MSA1000 Storage
csu4 at fedex.com
csu4 at fedex.com
Thu Jun 30 07:47:22 UTC 2005
SecurePath does more than just connectivity which the driver
does. It also provides the dual channels for performance and
balancing, as well as the redundancy you needed to run critical
business.
Rgds,
SCHYU
Kay Winterhager
<Kay.Winterhager at lsg.vander To: Red Hat Network Users List <rhn-users at redhat.com>
lande.com> cc:
Sent by: Subject: Re: [rhn-users] Problem with HP DL380 G4 and MSA1000
rhn-users-bounces at redhat.co Storage
m
06/30/2005 02:47 PM
Please respond to Red Hat
Network Users List
Hi,
I got the information that I don't need the Secure Path when I use the
newest driver for the HBA QLogic2x00 Chip.
The functionality should be integrated in this new driver....
regards
Kay
csu4 at fedex.com
Sent by:
rhn-users-bounces To
@redhat.com Red Hat Network Users List
<rhn-users at redhat.com>
cc
30.06.2005 03:08
Subject
Re: [rhn-users] Problem with HP
Please respond to DL380 G4 and MSA1000 Storage
Red Hat Network
Users List
<rhn-users at redhat
.com>
Have you configured Secure Path from the MSA1000 level
during the setup stage? If you configured them then it
should present you only the mirrored logical drives, e.g.
sda, sda, sdc, etc. You should not see other disks as
they are not presented to you.
Rgds,
SCHYU
Kay Winterhager
<Kay.Winterhager at lsg.vander To:
rhn-users at redhat.com
lande.com> cc:
Sent by: Subject:
[rhn-users] Problem with HP DL380 G4 and MSA1000
rhn-users-bounces at redhat.co Storage
m
06/29/2005 10:53 PM
Please respond to Red Hat
Network Users List
I have a problem with a HP DL380 G4 and a MSA1000 Storage.
I use redundant HP FCA 2214 HBA with QLogic23xx Chip for the connection to
the storage.
I have 6 disk in the storage, 3 logical drives (RAID 1)
During the boot of the server I get many errors for sda, sdb and sdc:
"Buffer I/O error on device sda, logical block 0..15" etc.
With FDISK and Webmin Partition Manager I can configure the devices sdd,
sde, sdf.
What is the problem with sda, sdb and sdc and what have I to do, to use
sda, sdb and sdc?
Thanks
Kay
_______________________________________________
rhn-users mailing list
rhn-users at redhat.com
https://www.redhat.com/mailman/listinfo/rhn-users
_______________________________________________
rhn-users mailing list
rhn-users at redhat.com
https://www.redhat.com/mailman/listinfo/rhn-users
_______________________________________________
rhn-users mailing list
rhn-users at redhat.com
https://www.redhat.com/mailman/listinfo/rhn-users
More information about the rhn-users
mailing list