[rhn-users] FC4 not seeing PDC20378 (FastTrak 378/SATA 378)
Mihai Ibanescu
misa at redhat.com
Thu Oct 20 14:40:44 UTC 2005
Hi,
This list is focused Red Hat Network. You will have better luck posting to one
of the Fedora lists.
Cheers,
Misa
On Thu, Oct 20, 2005 at 10:24:32AM -0400, tlc wrote:
> I have an onboard PDC20378 (FastTrak 378/SATA 378) set in IDE RAID mode. (
> I have tried it in IDE non RAID as well ) and although linux finds the
> controller an loads the sata_promise driver for it, there are no devices
> detected attached to the card.
>
> Asus P4P800 Deluxe, 2GB,P43.0E
>
> Booting off an SATA drive, a CD and a DVDR drive on the secondary IDE. The
> IDE ports are set in compatibility mode, secondary PATA + SATA
>
> I have to IDE drives on the promise controller and the promise BIOS sees
> both drives and created a RAID0
>
> I am running a 2.6.11.12 kernel due to a win4lin SMP issue, but from what
> I read the problem with this card was already fixed before 2.6.11.x
>
> below is some useful information .. let me know if I forgot
> something...any thoughts would be helpful..if upgrading to a newer kernel
> is the only option then fine, but I am hoping to find a workaround, I am
> having trouble with newer kernels ( upgrade issues from FC3 to FC4 )
>
> uname -a
> Linux tlacicero.artemide.us 2.6.11.12 #1 SMP Fri Oct 7 16:34:30 EDT 2005
> i686 i686 i386 GNU/Linux
>
> lspci -v -v
>
> 02:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak
> 378/SATA 378) (rev 02)
> Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe
> motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 96 (1000ns min, 4500ns max), Cache Line Size 91
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at df00 [size=64]
> Region 1: I/O ports at dfa0 [size=16]
> Region 2: I/O ports at dc00 [size=128]
> Region 3: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> Region 4: Memory at feac0000 (32-bit, non-prefetchable)
> [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> lsmod
> -snip-
> sata_promise 10372 0
> dm_snapshot 17704 0
> dm_zero 2560 0
> dm_mirror 22752 0
> dm_mod 57992 6 dm_snapshot,dm_zero,dm_mirror
> ata_piix 9348 2
> libata 45060 2 sata_promise,ata_piix
> sd_mod 18688 3
> scsi_mod 127688 3 sata_promise,libata,sd_mod
>
> /proc/scsi/scsi
> Vendor: ATA Model: ST380013AS Rev: 8.05
> Type: Direct-Access ANSI SCSI revision: 05
>
> dmesg
> ide: Assuming 66MHz system bus speed for PIO modes
> ide0: I/O resource 0x1F0-0x1F7 not free.
> ide0: ports already in use, skipping probe
> Probing IDE interface ide1...
> hdc: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
> hdd: ASUS CD-S520/A4, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide2...
> Probing IDE interface ide3...
> Probing IDE interface ide4...
> Probing IDE interface ide5...
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 52X CD-ROM drive, 128kB Cache
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 8192 buckets, 128Kbytes
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI wakeup devices:
> P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M ILAN
> ACPI: (supports S0 S1 S3 S4 S5)
> Freeing unused kernel memory: 224k freed
> SCSI subsystem initialized
> libata version 1.10 loaded.
> ata_piix version 1.03
> ata_piix: combined mode detected
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
> ata: 0x170 IDE port busy
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
> ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003
> 88:207f
> ata1: dev 0 ATA, max UDMA/133, 156250000 sectors: lba48
> ata1: dev 0 configured for UDMA/133
> scsi0 : ata_piix
> Vendor: ATA Model: ST380013AS Rev: 8.05
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
> [1]dm-devel at redhat.com
> cdrom: open failed.
> cdrom: open failed.
> ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
> ReiserFS: dm-0: using ordered data mode
> ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first
> block 18, max trans len 1024, max batch 900, max commit age 30, max trans
> age 30
> ReiserFS: dm-0: checking transaction log (dm-0)
> ReiserFS: dm-0: Using r5 hash to sort names
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> sata_promise version 1.01
> ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 177
> ata2: SATA max UDMA/133 cmd 0xF8940200 ctl 0xF8940238 bmdma 0x0 irq 177
> ata3: SATA max UDMA/133 cmd 0xF8940280 ctl 0xF89402B8 bmdma 0x0 irq 177
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_promise
> ata3: no device found (phy stat 00000000)
> scsi2 : sata_promise
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 185
> ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 185
> eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
> PrefPort:A RlmtMode:Check Link State
> ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> intel8x0_measure_ac97_clock: measured 49786 usecs
> intel8x0: clocking to 48000
> i801_smbus 0000:00:1f.3: I801 using PCI Interrupt for SMBus.
> i801_smbus 0000:00:1f.3: SMBREV = 0x2
> i801_smbus 0000:00:1f.3: I801_smba = 0x400
> i2c_adapter i2c-0: registered as adapter #0
> hw_random hardware driver 1.0.0 loaded
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
> ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
> Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 177, pci mem 0xfebfbc00
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> cdrom: open failed.
> cdrom: open failed.
> ReiserFS: sda1: found reiserfs format "3.6" with standard journal
> ReiserFS: sda1: using ordered data mode
> ReiserFS: sda1: journal params: device sda1, size 8192, journal first
> block 18, max trans len 1024, max batch 900, max commit age 30, max trans
> age 30
> ReiserFS: sda1: checking transaction log (sda1)
> ReiserFS: sda1: Using r5 hash to sort names
> Adding 2097144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
>
> References
>
> Visible links
> 1. mailto:dm-devel at redhat.com
> _______________________________________________
> rhn-users mailing list
> rhn-users at redhat.com
> https://www.redhat.com/mailman/listinfo/rhn-users
More information about the rhn-users
mailing list