[rhn-users] Intermittent system lock ups on IBM x366running64bitRHEL3U5-x86_64

Michael Andrewjeski mandrewjeski at zonelabs.com
Thu Sep 22 16:54:27 UTC 2005


BTW the patched kernel was based on UPDATE 5

  _____  

From: rhn-users-bounces at redhat.com [mailto:rhn-users-bounces at redhat.com]
On Behalf Of Michael Andrewjeski
Sent: Thursday, September 22, 2005 9:35 AM
To: Red Hat Network Users List
Subject: RE: [rhn-users] Intermittent system lock ups on IBM
x366running64bitRHEL3U5-x86_64


we also  have had lockup issues with x366, though in our initial case we
were using Update 3. Redhat actually worked on a patch that seemed to
work, not sure what the status of that patch is. 
 
 
hth
Mike

  _____  

From: rhn-users-bounces at redhat.com [mailto:rhn-users-bounces at redhat.com]
On Behalf Of Lamon, Frank III
Sent: Thursday, September 22, 2005 9:13 AM
To: Red Hat Network Users List
Subject: RE: [rhn-users] Intermittent system lock ups on IBM x366
running64bitRHEL3U5-x86_64


We've seen those type hangs with Broadcom NICs and Adaptec controllers.
An IBM supplied driver may resolve the problem. 

	-----Original Message-----
	From: rhn-users-bounces at redhat.com
[mailto:rhn-users-bounces at redhat.com]On Behalf Of Schaus, Scott K
	Sent: Thursday, September 22, 2005 11:01 AM
	To: rhn-users at redhat.com
	Subject: [rhn-users] Intermittent system lock ups on IBM x366
running 64bitRHEL3U5-x86_64
	
	


	Has anybody experienced system lockups and/or system hangs. 

	We recently loaded an IBM X366 4processor box with RedHat 3.0
update 5  x86_64  64bit.  We now see occasionally over night or
throughout the day system hangs. To the point where the interfaces may
be pingable but ssh or telnet are not allowed. Connectivity through a
RSA-II card is allowed but the remote control capability is useless. At
this point only a system reset clears up the system so it can be
accessed once again.

	Diagnosis from the RSA has been run and comes back clean.  No
error logs explaining loss of power or temp warnings. No loss of network
connectivity or cpu/memory failures.  The system simply locks up.

	Any help would be greatly appreciated. 


	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
	Scott K. Schaus 
	Infrastructure Specialist 
	GSOC - Remote Infrastructure Support Team 
	Scott.Schaus at eds.com * email 
	     Make it a Great Day !     
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 


  _____  

This email transmission and any accompanying attachments may contain CSX
privileged and confidential information intended only for the use of the
intended addressee. Any dissemination, distribution, copying or action
taken in reliance on the contents of this email by anyone other than the
intended recipient is strictly prohibited. If you have received this
email in error please immediately delete it and notify sender at the
above CSX email address. Sender and CSX accept no liability for any
damage caused directly or indirectly by receipt of this email. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rhn-users/attachments/20050922/2720b6b0/attachment.htm>


More information about the rhn-users mailing list