[vfio-users] Cannot fix Error 43 for GTX 680 passed through to win 10 guest

[overfl0w]

I did that on 680, and its not stable with just removing, and its prettry
hard to get it working... you need 33x GRID driver and GRID K2 bios, reboot
doesn't work... only thing that works better like that is that it can be
second gpu in vm with cirrus etc...

On Tuesday, October 6, 2015, <root at yoshi.dynu.com> wrote:

> Hey! Didn't brick the card!
>
> lspci -nn reports a Grid K2 with 10de:11bf.
>
>
> what i did is to remove two resistors to change the device-id. Windows
> runs fine natively with the card. Bios on the card is still the same. So i
> added this to the vfio-pci.ids kernel flag and gave it a go.
> Problem now is that i do not get any output on the card (also windows
> guest seem not to be booted since i cannot log into it via Teamviewer as i
> did before).
>
> Any hints or ideas are welcome.
>
> _______________________________________________
> vfio-users mailing list
> vfio-users at redhat.com
> https://www.redhat.com/mailman/listinfo/vfio-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/vfio-users/attachments/20151006/308d95ec/attachment.htm>