[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [vfio-users] Radeon R9 290 passthrough to Win10 guest - bsod/reboot on driver install



Hello,

Here is my vfio .xml:
https://github.com/qdel/scripts/blob/master/vfio/win10.xml

for info, i7 4790k, asrock extreme 6 (z 97), r9 290

I had in the past problem of bsod during driver install, but not anymore using latest versions. It work nearly flawlessly.
I use suspend of vm while suspending the host... sometimes, at restart the gpu crash and crash the host (1 out of 10 resume, not so good ration...) at this moment, i cannot enter windows:

I speak of radeon, because if you switch from radeon driver to vfio during runtime, you need to know that radeon does not let the card in a clean state...



--
Deldycke Quentin


On 18 April 2016 at 02:47, Stewart Adam <s adam diffingo com> wrote:
I faced similar issues with my R270, in my case *entirely removing* the vmport=off option (its presence alone caused issues) and attaching the GPU to a ioh3420 device instead of directly to the PCI bus fixed the issue: https://www.redhat.com/archives/vfio-users/2015-December/msg00211.html

Like many of you mention, I tried several versions from both Catalyst and Crimson and all failed without those two elements in my configuration. Without them, I experienced all sorts of hangs and BSODs on driver installation or boot-up. It's worked flawlessly, even after several guest reboots, since adding them.

This thread from January is also be relevant: https://www.redhat.com/archives/vfio-users/2016-January/msg00191.html

Regards,
Stewart

On 2016-04-17 6:15 PM, Ryan Flagler wrote:

I ran an R9 280 with only the reboot issue. I believe the most important settings for me were using the i440fx chipset and the uefi bios.


On Sun, Apr 17, 2016, 4:21 PM Eric Griffith <egriffith92 gmail com <mailto:egriffith92 gmail com>> wrote:

    Jonas, I've got an R9 290X and after fighting for a few weeks with
    Win7/8.1/10 BSODs during driver-install, I eventually just said "screw
    it" and stopped trying. It's one reason why I'm thinking of going
    Nvidia for this upcoming generation

    On Apr 17, 2016 17:13, "Jonas Camillus Jeppesen" <jonascj sdu dk
    <mailto:jonascj sdu dk>> wrote:

        I have tried both i440FX and Q35. Both seem to produce the same
        result. Q35 seems to reboot/crash earlier than i440FX, i.e.
        already during driver extraction before the installation begins.
        As a matter of fact the Q35 install is not stable at all, it
        reboots/crashes after roughly 1min no matter what I do (idle on
        desktop, at login screen, installing driver, etc.).

        To answer a question by Quentin which went to me directly instead
        of the list:

        On 04/17/2016 10:21 PM, Quentin Deldycke wrote:

        Hello,

        I have same gpu nearly same processor, and no problems.

        I can install drivers without problem. Even very last ones.

        I will send further information tomorrow as I am not on this pc
        right now :)

        Does Radeon was loaded before you switch to vfio-pci?  (what was
        using card at boot)


        What do you mean if Radeon was loaded before switching to vfio-pci?

        First I configured my host to make vfio-pci claim the radeon card
        as described here (/etc/modprobe.d/vfio.conf with IDs to be
        claimed):
        https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF#vfio-pci

        Then I install Windows 10 using virt-manager and its provided
        display (SPICE/VNC). Once the system is configured with an VNC
        server (or Synergy for sharing mouse/keyboard) I shutdown, remove
        all SPICE/VNC adapters, add my Radeon gpu and boot the guest
        again. This time the graphics output appears on the monitor
        connected to the Radeon GPU, and I would expect that I could just
        install the Radeon driver at this point, but apparently not.

        I haven't tried installing Windows with the Radeon GPU passed
        through during installation, I will try that next.


        On 04/17/2016 10:51 PM, Ryan Flagler wrote:

        What chipset emulation are you using?


        On Sun, Apr 17, 2016, 3:17 PM Jonas Camillus Jeppesen
        <jonascj sdu dk <mailto:jonascj sdu dk>> wrote:

            Hello everyone

            Anyone having Windows 10 guests with Radeon R9 290 passed
            through via VFIO, and if so, did you experience any problems
            installing drivers?

            I have a R9290-DC2OC-4GD5 passed through to a Windows 10
            guest (build 10586.104, newest ISO from Microsoft.com), and
            at first glance everything seems fine. I get output on my R9
            290 GPU when I start my guest, Windows 10 boots, I am able to
            login etc., but I am stuck with some built-in Microsoft
            display driver because the Win10 guest reboots/BSODs when I
            try to install the AMD drivers.

            Device manager on the guest shows a "Video Controller (VGA
            Compatible)" and its VEN_ID and DEV_ID indicates that it is
            the AMD R9 GPU. Regardless of whether I go through AMD's
            driver installer, or if I right-click this device and update
            driver the guest reboots during the installation.

            I have tried different AMD driver verisons, but you can only
            go so far back before it complains that the driver does not
            support this version of Windows (i.e. version <14 does not
            support Win10).

            Any suggestions as to what I might try to resolve this, or
            anyone with similar problems?

            Thank you for reading,
            JonasCJ

            - - - - - - - - - - - - -

            My config / setup is this:

            Arch Linux, kernel 4.5.0, unpatched
            CPU: Intel i7-4770
            Guest GPU: R9290-DC2OC-4GD5
            Host GPU: Built-in Intel i7 gpu
            Motherboard: ASROCK Z87M Extreme 4 (GPU in PCI-E port 4)

            I assume the basics are working since I get output on my
            guest gpu and no immediate BSODs/reboots etc., but for the
            sake of completeness:

            # lspci -nnk
            04:00.0 VGA compatible controller [0300]: Advanced Micro
            Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290] [1002:67b1]
                    Subsystem: ASUSTeK Computer Inc. Device [1043:0470]
                    Kernel driver in use: vfio-pci
                    Kernel modules: radeon
            04:00.1 Audio device [0403]: Advanced Micro Devices, Inc.
            [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
                    Subsystem: ASUSTeK Computer Inc. Device [1043:aac8]
                    Kernel driver in use: vfio-pci
                    Kernel modules: snd_hda_intel


            # IOMMU groups listed as described here:
            https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF#Ensuring_that_the_groups_are_valid
            IOMMU group 0
                    00:00.0 Host bridge [0600]: Intel Corporation 4th Gen
            Core Processor DRAM Controller [8086:0c00] (rev 06)
            IOMMU group 1
                    00:01.0 PCI bridge [0604]: Intel Corporation Xeon
            E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller
            [8086:0c01] (rev 06)
            IOMMU group 2
                    00:02.0 VGA compatible controller [0300]: Intel
            Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated
            Graphics Controller [8086:0412] (rev 06)
            IOMMU group 3
                    00:03.0 Audio device [0403]: Intel Corporation Xeon
            E3-1200 v3/4th Gen Core Processor HD Audio Controller
            [8086:0c0c] (rev 06)
            IOMMU group 4
                    00:14.0 USB controller [0c03]: Intel Corporation 8
            Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
            IOMMU group 5
                    00:16.0 Communication controller [0780]: Intel
            Corporation 8 Series/C220 Series Chipset Family MEI
            Controller #1 [8086:8c3a] (rev 04)
            IOMMU group 6
                    00:19.0 Ethernet controller [0200]: Intel Corporation
            Ethernet Connection I217-V [8086:153b] (rev 05)
            IOMMU group 7
                    00:1a.0 USB controller [0c03]: Intel Corporation 8
            Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d]
            (rev 05)
            IOMMU group 8
                    00:1b.0 Audio device [0403]: Intel Corporation 8
            Series/C220 Series Chipset High Definition Audio Controller
            [8086:8c20] (rev 05)
            IOMMU group 9
                    00:1c.0 PCI bridge [0604]: Intel Corporation 8
            Series/C220 Series Chipset Family PCI Express Root Port #1
            [8086:8c10] (rev d5)
            IOMMU group 10
                    00:1c.3 PCI bridge [0604]: Intel Corporation 8
            Series/C220 Series Chipset Family PCI Express Root Port #4
            [8086:8c16] (rev d5)
            IOMMU group 11
                    00:1c.4 PCI bridge [0604]: Intel Corporation 8
            Series/C220 Series Chipset Family PCI Express Root Port #5
            [8086:8c18] (rev d5)
            IOMMU group 12
                    00:1d.0 USB controller [0c03]: Intel Corporation 8
            Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26]
            (rev 05)
            IOMMU group 13
                    00:1f.0 ISA bridge [0601]: Intel Corporation Z87
            Express LPC Controller [8086:8c44] (rev 05)
                    00:1f.2 SATA controller [0106]: Intel Corporation 8
            Series/C220 Series Chipset Family 6-port SATA Controller 1
            [AHCI mode] [8086:8c02] (rev 05)
                    00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220
            Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
            IOMMU group 14
                    04:00.0 VGA compatible controller [0300]: Advanced
            Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290]
            [1002:67b1]
                    04:00.1 Audio device [0403]: Advanced Micro Devices,
            Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]






            _______________________________________________
            vfio-users mailing list
            vfio-users redhat com <mailto:vfio-users redhat com>
            https://www.redhat.com/mailman/listinfo/vfio-users



        _______________________________________________
        vfio-users mailing list
        vfio-users redhat com <mailto:vfio-users redhat com>
        https://www.redhat.com/mailman/listinfo/vfio-users



_______________________________________________
vfio-users mailing list
vfio-users redhat com
https://www.redhat.com/mailman/listinfo/vfio-users

_______________________________________________
vfio-users mailing list
vfio-users redhat com
https://www.redhat.com/mailman/listinfo/vfio-users


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]