[vfio-users] OVMF: Boots only first time after driver installation
sL1pKn07 SpinFlo
sl1pkn07 at gmail.com
Tue Jan 5 02:30:26 UTC 2016
2016-01-04 23:20 GMT+01:00 Volker Rümelin <vr_qemu at t-online.de>:
> Hi,
>
> I use a AMD R9 270X and with a configuration like yours my win 8.1 guest
> also does not boot. My guest works fine if I don't pass through my gpu as a
> multifunction device. Perhaps something like this will work for you:
>
> -device ioh3420,bus=pcie.0,addr=1c.0,port=1,chassis=1,id=root.1
> -device
> vfio-pci,host=01:00.0,bus=root.1,addr=00.0,romfile=/root/qemu/rom/amd285.rom
> -device vfio-pci,host=01:00.1,bus=pcie.0,addr=10.0
>
> I haven't tested these lines above because I use libvirt.
>
> Regards
> Volker
>
Hi
you can test it if add
'xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0' (with ') to
the <domain type='kvm'> line, and
<qemu:commandline>
<qemu:arg value='-device'/>
<qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,port=1,chassis=1,id=root.1'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=01:00.0,bus=root.1,addr=00.0,romfile=/root/qemu/rom/amd285.rom'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=01:00.1,bus=pcie.0,addr=10.0'/>
</qemu:commandline>
just before </domain> line
Greetings
More information about the vfio-users
mailing list