[vfio-users] intel_iommu=on and aacraid / Adaptec 3805

[Alex Williamson]

On Sun, 17 Jul 2016 05:32:29 -0500
David <david283 at gmail.com> wrote:

> OK, installed all these rpms and rebooted.  IOMMU is still on, but
> sadly the Raid volume still isn't showing up.  Rebooted a second time
> to be sure.  Attaching new error log.
> 
> $ uname -r
> 4.6.4-302.aw0.fc24.x86_64
> 
> # lsblk -f
> NAME                                              FSTYPE      LABEL
> UUID                                   MOUNTPOINT
> sda
> ├─sda1                                            vfat        efi
> 9E87-0ECF                              /boot/efi
> ├─sda2                                            ext4        boot
> 4f8d2664-8fc0-4779-ac18-6f0c06152d27   /boot
> └─sda3                                            crypto_LUKS
> ccee7bd2-4dce-4966-addb-bba6194ade93
>   └─luks-ccee7bd2-4dce-4966-addb-bba6194ade93     LVM2_member
> MePSH6-Fo6u-3mNp-ou31-uU4r-rCVz-5sPM79
>     ├─linuslvm1-root                              crypto_LUKS
> 5101eab0-8b88-414f-8ec8-ec8dbe3e6791
>     │ └─luks-5101eab0-8b88-414f-8ec8-ec8dbe3e6791 ext4        root
> 3f788b0c-9721-4359-9f09-5dbc6a37d8e9   /
>     └─linuslvm1-swap                              swap        swap
> 5e897a06-decb-4001-b60d-baabaa056b70   [SWAP]
> sdb
> 
> # lspci -v -s 03:0e.0
> 03:0e.0 RAID bus controller: Adaptec AAC-RAID
>     Subsystem: Adaptec 3805
>     Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 60
>     Memory at fa600000 (64-bit, non-prefetchable) [size=2M]
>     Expansion ROM at fa800000 [disabled] [size=256K]
>     Capabilities: [c0] Power Management version 2
>     Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+
>     Capabilities: [e0] PCI-X non-bridge device
>     Kernel driver in use: aacraid
>     Kernel modules: aacraid

Please provide 'lspci -nnvs 03:0e.0'.  Thanks,

Alex