[vfio-users] Unable to isolate HDMI device

[LOMBARD Maxime]

> softdep snd-hda-intel pre: vfio-pci
It's only used by the Ids that i added in the same vfio.conf ?
Because i have other device which use snd_hda_intel module.

I tried it this afternoon but it's strange that i need it on Gentoo and not on Debian.

Envoyé de mon iPhone

> Le 3 août 2017 à 08:59, Karsten Elfenbein <karsten.elfenbein at gmail.com> a écrit :
> 
> Hi Maxime,
> 
> the modules need to load in the correct order. In this case the
> vfio-pci needs to load before the snd-hda-intel and nvidia.
> 
> I have the following lines on my Gentoo machine to achieve that:
> 
> cat /etc/modprobe.d/vfio.conf
> softdep nvidia pre: vfio-pci
> softdep snd-hda-intel pre: vfio-pci
> ...
> 
> Best regards
> Karsten
> 
> 
> 2017-08-03 8:47 GMT+02:00 LOMBARD Maxime <berillions at gmail.com>:
>> Hi,
>> 
>> I have a big problem on my Gentoo. A problem which does not exist on my
>> Debian in the same Desktop.
>> 
>> 1- i added in "/etc/modprobe.d/vfio.conf" the ids for my gtx970, gpu and
>> HDMI
>> 
>> 2- i added the vfio module in "/etc/conf.d/modules" to load them during the
>> boot.
>> 
>> After the reboot, there is only the VGA device which is attached to vfio,
>> the HDMI is still used by intel_hda module.
>> 
>> You can see my message in the gentoo forum :
>> https://forums.gentoo.org/viewtopic-t-1067110.html
>> 
>> Thanks for your help.
>> Maxime
>> 
>> 
>> _______________________________________________
>> vfio-users mailing list
>> vfio-users at redhat.com
>> https://www.redhat.com/mailman/listinfo/vfio-users
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/vfio-users/attachments/20170803/4fcf04a3/attachment.htm>