[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[virt-tools-list] RE: [Xen-devel] Virt-manager issue resolved



you mean "#xend start" and "#./xendomains start" doesn't work in /etc/init.d?
At first place dom0 must be listed in #xm list as a running domain

Regards,
Fasiha Ashraf

--- On Fri, 6/11/09, Caz Yokoyama <cazyokoyama gmail com> wrote:

From: Caz Yokoyama <cazyokoyama gmail com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk yahoo co in>, "'xen'" <xen-devel lists xensource com>
Cc: "'Fedora Xen'" <fedora-xen redhat com>, virt-tools-list redhat com
Date: Friday, 6 November, 2009, 5:03 PM

Hello Fasiha,

[root tragi caz]# iptables -F

[root tragi caz]# iptables -L

Chain INPUT (policy ACCEPT)

target     prot opt source               destination        

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination        

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination        

[root tragi caz]# sh -x /etc/init.d/xend start

+ . /etc/rc.d/init.d/functions

++ TEXTDOMAIN=initscripts

++ umask 022

++ PATH=/sbin:/usr/sbin:/bin:/usr/bin

++ export PATH

++ '[' -z '' ']'

++ COLUMNS=80

++ '[' -z '' ']'

+++ /sbin/consoletype

++ CONSOLETYPE=pty

++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']'

++ . /etc/profile.d/lang.sh

+++ sourced=0

+++ '[' -n en_US.UTF-8 ']'

+++ saved_lang=en_US.UTF-8

+++ '[' -f /root/.i18n ']'

+++ LANG=en_US.UTF-8

+++ unset saved_lang

+++ '[' 0 = 1 ']'

+++ unset sourced

+++ unset langfile

++ unset LANGSH_SOURCED

++ '[' -z '' ']'

++ '[' -f /etc/sysconfig/init ']'

++ . /etc/sysconfig/init

+++ BOOTUP=color

+++ RES_COL=60

+++ MOVE_TO_COL='echo -en \033[60G'

+++ SETCOLOR_SUCCESS='echo -en \033[0;32m'

+++ SETCOLOR_FAILURE='echo -en \033[0;31m'

+++ SETCOLOR_WARNING='echo -en \033[0;33m'

+++ SETCOLOR_NORMAL='echo -en \033[0;39m'

+++ LOGLEVEL=3

+++ PROMPT=yes

+++ AUTOSWAP=no

++ '[' pty = serial ']'

++ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'

+ '[' '!' -d /proc/xen ']'

+ grep -q control_d /proc/xen/capabilities

+ RETVAL=0

+ case "$1" in

+ start

+ echo -n 'Starting xend daemon: '

Starting xend daemon: + /usr/sbin/xend

+ RETVAL=1

+ test 1 = 0

+ echo_failure

+ '[' color = color ']'

+ echo -en '\033[60G'

                                                           + echo -n '['

[+ '[' color = color ']'

+ echo -en '\033[0;31m'

+ echo -n FAILED

FAILED+ '[' color = color ']'

+ echo -en '\033[0;39m'

+ echo -n ']'

]+ echo -ne '\r'

+ return 1

+ echo

 

+ '[' 1 -eq 0 ']'

+ exit 1

[root tragi caz]# sh -x /etc/init.d/xendomains start

+ '[' -e /proc/xen/privcmd ']'

+ LOCKFILE=/var/lock/subsys/xendomains

+ XENDOM_CONFIG=/etc/sysconfig/xendomains

+ test -r /etc/sysconfig/xendomains

+ . /etc/sysconfig/xendomains

++ XENDOMAINS_SYSRQ=

++ XENDOMAINS_USLEEP=100000

++ XENDOMAINS_CREATE_USLEEP=5000000

++ XENDOMAINS_MIGRATE=

++ XENDOMAINS_SAVE=/var/lib/xen/save

++ XENDOMAINS_SHUTDOWN='--halt --wait'

++ XENDOMAINS_SHUTDOWN_ALL='--all --halt --wait'

++ XENDOMAINS_RESTORE=true

++ XENDOMAINS_AUTO=/etc/xen/auto

++ XENDOMAINS_AUTO_ONLY=false

++ XENDOMAINS_STOP_MAXWAIT=300

/etc/init.d/xendomains: line 125: syntax error near unexpected token `<'

/etc/init.d/xendomains: line 125: `     if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel); fi'

[root tragi caz]# xm info

Error: Unable to connect to xend: No such file or directory. Is xend running?

 

The line which produces syntax error above does not produces an error when it is invoked manually. What xendomains do you have?

-caz

 


From: Fasiha Ashraf [mailto:feehapk yahoo co in]
Sent: Thursday, November 05, 2009 10:42 PM
To: 'xen'; Caz Yokoyama
Cc: 'Fedora Xen'; virt-tools-list redhat com
Subject: RE: [Xen-devel] Virt-manager issue resolved

 

Try starting xend and xendomains after flushing iptable rules. #iptables -F
run
#iptables -F
then
#xend start
and then inside /etc/init.d
#./xendomains start
now to check whether xend is running or not. Use #xm info or #xm list

Regards,
Fasiha Ashraf

--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama gmail com> wrote:


From: Caz Yokoyama <cazyokoyama gmail com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk yahoo co in>, "'xen'" <xen-devel lists xensource com>
Cc: "'Fedora Xen'" <fedora-xen redhat com>, virt-tools-list redhat com
Date: Thursday, 5 November, 2009, 5:21 PM

Hello Fasiha,

[root tragi caz]# iptables -L

Chain INPUT (policy ACCEPT)

target     prot opt source               destination        

ACCEPT     udp  --  anywhere             anywhere            udp dpt:domain

ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:domain

ACCEPT     udp  --  anywhere             anywhere            udp dpt:bootps

ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:bootps

ACCEPT     all  --  anywhere             anywhere            state RELATED,ESTABLISHED

ACCEPT     icmp --  anywhere             anywhere           

ACCEPT     all  --  anywhere             anywhere           

ACCEPT     tcp  --  anywhere             anywhere            state NEW tcp dpt:ssh

REJECT     all  --  anywhere             anywhere            reject-with icmp-host-prohibited

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination        

ACCEPT     all  --  anywhere             192.168.122.0/24    state RELATED,ESTABLISHED

ACCEPT     all  --  192.168.122.0/24     anywhere           

ACCEPT     all  --  anywhere             anywhere           

REJECT     all  --  anywhere             anywhere            reject-with icmp-port-unreachable

REJECT     all  --  anywhere             anywhere            reject-with icmp-port-unreachable

REJECT     all  --  anywhere             anywhere            reject-with icmp-host-prohibited

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination        

Thank you.

-caz

 


From: Fasiha Ashraf [mailto:feehapk yahoo co in]
Sent: Thursday, November 05, 2009 1:07 AM
To: 'xen'; Caz Yokoyama
Cc: virt-tools-list redhat com; 'Fedora Xen'
Subject: RE: [Xen-devel] Virt-manager issue resolved

 

Please send the output of #iptables -L

Regards,
Fasiha Ashraf

--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama gmail com> wrote:


From: Caz Yokoyama <cazyokoyama gmail com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk yahoo co in>, "'xen'" <xen-devel lists xensource com>
Cc: virt-tools-list redhat com, "'Fedora Xen'" <fedora-xen redhat com>
Date: Thursday, 5 November, 2009, 11:03 AM

Hello Fasiha,

Thank you for summarizing the procedure. I don’t have xend running. Here is the procedure I did.

Install Fedora 11 x86_64, full update.

su

yum install transfig texi2html libaio-devel dev86 glibc-devel.i586

yum install PyXML bridge-utils qemu-img qemu-common

wget http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/5.fc12/src/xen-3.4.1-5.fc12.src.rpm

rpm -ivh xen-3.4.1-5.fc12.src.rpm

cd

cd rpmbuild/SPECS/

rpmbuild -bb xen.spec

cd ~/rpmbuild/RPMS/x86_64

rpm -ivh *.rpm

cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF

[virt-preview]

name=Virtualization Rawhide for Fedora 11

baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/

enabled=1

gpgcheck=0

EOF

yum install libvirt libvirt-python python-virtinst virt-manager virt-viewer

rpm -qa | grep virt

cd virt-manager

git clone git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git JeremyDom0

make menuconfig

make all

su

make modules_install install

reboot with xen

 

> Does "virsh list" work

# virsh list

error: Unable to connect to ‘localhost:8000’: Connection refused

error: failed to connect to the hypervisor

 

“/etc/init.d/xend start” failed because /usr/sbin/xend returns 1.

 

Suggestion? I have attached .config.

-caz

 


From: Fasiha Ashraf [mailto:feehapk yahoo co in]
Sent: Thursday, October 29, 2009 10:31 PM
To: 'xen'; Caz Yokoyama
Cc: virt-tools-list redhat com; 'Fedora Xen'
Subject: RE: [Xen-devel] Virt-manager issue resolved

 

 Latest virt-manager doesn't work with the previous version of libvirt on fc11. You need to build xen and latest libvirt form rpm. Follow the steps below.

 

Install packages required by rpmbuild:-
# yum install transfig texi2html libaio-devel dev86 glibc-devel.i586
Download xen-3.4.1-1.fc12.src.rpm
# wget http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/src/xen-3.4.1-1.fc12.src.rpm
# rpm -iv xen-3.4.1-1.fc12.src.rpm
# cd /root/rpmbuild/SPECS
# rpmbuild -ba ./xen.spec
To install hypervisor and tools
# cd ../RPMS/x86_64
# yum install xen-3.4.1-1.fc11.x86_64.rpm \
xen-debuginfo-3.4.1-1.fc11.x86_64.rpm \
xen-devel-3.4.1-1.fc11.x86_64.rpm \
xen-doc-3.4.1-1.fc11.x86_64.rpm \
xen-hypervisor-3.4.1-1.fc11.x86_64.rpm \
xen-libs-3.4.1-1.fc11.x86_64.rpm \
xen-runtime-3.4.1-1.fc11.x86_64.rpm

To install new libvirt-0.7.0-6
# cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF
[virt-preview]
name=Virtualization Rawhide for Fedora 11
baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/
enabled=1
gpgcheck=0
EOF

# yum install libvirt libvirt-python python-virtinst \
virt-manager virt-viewer

# rpm -qa|grep virt

the following list must be there may be with higher version numbers.

libvirt-client-0.7.0-6.fc11.x86_64
libvirt-python-0.7.0-6.fc11.x86_64
virt-viewer-0.2.0-1.fc11.x86_64
virt-manager-0.7.0-5.fc11.x86_64
libvirt-0.7.0-6.fc11.x86_64
python-virtinst-0.500.0-1.fc11.noarch


All the above steps should be done on the base kernel. Now compile and build xen with paravirt kernel. Now boot into the new xen kernel after starting xend run this

# xm info

to check. now you can use virt-manager in your set-up


Regards,
Fasiha Ashraf

--- On Thu, 29/10/09, Caz Yokoyama <cazyokoyama gmail com> wrote:


From: Caz Yokoyama <cazyokoyama gmail com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk yahoo co in>, "'xen'" <xen-devel lists xensource com>
Cc: virt-tools-list redhat com, "'Fedora Xen'" <fedora-xen redhat com>
Date: Thursday, 29 October, 2009, 6:19 PM

Could you summarize the procedure? I am trying to run virt-manager on Fedora 11 with Xen-3.5-unstable and Jeremy’s Dom0 (git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git). I am wondering what option should be good on make on xen-3.5-unstable. I did

Make xen tools

Make install-xen install-tools

What else I need do?

Booting dom0 is fine.

-caz


From: xen-devel-bounces lists xensource com [mailto:xen-devel-bounces lists xensource com] On Behalf Of Fasiha Ashraf
Sent: Tuesday, October 27, 2009 4:49 AM
To: Cole Robinson; xen
Cc: Fedora Xen; virt-tools-list redhat com
Subject: [Xen-devel] Virt-manager issue resolved

 

I have got para-virt option enabled by installing vm using through http. the problem was, i was trying to install it from DVD. Now the issue is it doesn't find the file on the givern location although i can access them from the same location in browser. PFA, the screen shots for the problem.

Regards
Fasiha Ashraf

--- On Mon, 26/10/09, Cole Robinson <crobinso redhat com> wrote:


From: Cole Robinson <crobinso redhat com>
Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not found: xenUnifiedDomainLookupByName
To: "Fasiha Ashraf" <feehapk yahoo co in>
Cc: virt-tools-list redhat com, bderzhavets yahoo com, "Xen users" <james harper bendigoit com au>, "Fedora Xen" <fedora-xen redhat com>
Date: Monday, 26 October, 2009, 7:08 PM

On 10/26/2009 09:24 AM, Fasiha Ashraf wrote:
> It seem that its trying to install HVM guest that is not possible using virt-manager.
> But you can see from the attached screen shot that virt type option is disabled and i can't select paravirt from it. what should i do?
> here's the log .virt-manager/virt-manager.log
>

Please include the other information I asked for:

virsh --connect xen:/// capabilities
virsh --connect xen:/// version

- Cole

> [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877) Default storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume 'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877) Default storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume 'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516) Creating a VM f
>   Type: xen,hvm
>   UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3
>   Install Source: /dev/sr0
>   OS: linux:fedora11
>   Kernel args: None
>   Memory: 512
>   Max Memory: 512
>   # VCPUs: 1
>   Filesize: 7.0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565) Starting background install process
> [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950) Creating storage volume 'f.img' with xml:
> <volume>
>   <name>f.img</name>
>   <capacity>7516192768</capacity>
>   <allocation>7516192768</allocation>
>   <target>
>     <format type='raw'/>
>   </target>
> </volume>
> [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973) Storage volume 'f.img' install complete.
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724) Creating guest from:
> <domain type='xen'>
>   <name>f</name>
>   <currentMemory>524288</currentMemory>
>   <memory>524288</memory>
>   <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid>
>   <os>
>     <type arch='x86_64'>hvm</type>
>     <loader>/usr/lib/xen/boot/hvmloader</loader>
>     <boot dev='cdrom'/>
>   </os>
>   <features>
>     <acpi/><apic/><pae/>
>   </features>
>   <clock offset="utc"/>
>   <on_poweroff>destroy</on_poweroff>
>   <on_reboot>destroy</on_reboot>
>   <on_crash>destroy</on_crash>
>   <vcpu>1</vcpu>
>   <devices>
>     <emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
>     <disk type='file' device='disk'>
>       <source file='/var/lib/libvirt/images/f.img'/>
>       <target dev='hda' bus='ide'/>
>     </disk>
>     <disk type='block' device='cdrom'>
>       <source dev='/dev/sr0'/>
>       <target dev='hdc' bus='ide'/>
>       <readonly/>
>  </disk>
>     <interface type='bridge'>
>       <source bridge='eth0'/>
>       <mac address='00:16:36:08:9e:36'/>
>     </interface>
>     <input type='tablet' bus='usb'/>
>     <graphics type='vnc' port='-1'/>
>     <console type='pty'/>
>     <sound model='es1370'/>
>   </devices>
> </domain>
>
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (netdevhelper:176) Adding net device vif3.0 fe:ff:ff:ff:ff:ff /sys/class/net/vif3.0 (bridge: None)
> [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (netdevhelper:138) Removing physical net device vif3.0 from list.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (opticalhelper:205) Optical device removed: /org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76) Uncaught Error: Unable to complete install: 'POST operation failed: xend_post: error from xen $
> Traceback (most recent call last):
>   File "/usr/share/virt-manager/virtManager/create.py", line 1575, in do_install
>     dom = guest.start_install(False, meter = meter)
>   File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install
>     return self._do_install(consolecb, meter, removeOld, wait)
>   File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in _do_install
>     self.domain = self.conn.createLinux(install_xml, 0)
>   File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in createLinux
>     if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
> libvirtError: POST operation failed: xend_post: error from xen daemon: <Fault 3: 'f'>
> '
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377) window counter decremented to 0
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385) Exiting app normally.
>
>
>
> Fasiha Ashraf
>
> --- On Mon, 26/10/09, Cole Robinson <crobinso redhat com> wrote:
>
> From: Cole Robinson <crobinso redhat com>
> Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not found: xenUnifiedDomainLookupByName
> To: "Fasiha Ashraf" <feehapk yahoo co in>
> Cc: virt-tools-list redhat com, bderzhavets yahoo com, "Xen users" <james harper bendigoit com au>, "Fedora Xen" <fedora-xen redhat com>
> Date: Monday, 26 October, 2009, 5:58 PM
>
> On 10/26/2009 06:48 AM, Fasiha Ashraf wrote:
>> Hi all
>> I am facing this error while installing Guest VM on FC11 using virt-manager
>> Unable to complete install '<class 'libvirt.libvirtError'> Domain not found: xenUnifiedDomainLookupByName
>> Traceback (most recent call last):
>>    File "/usr/share/virt-manager/virtManager/create.py", line 1575, in do_install
>>      dom = guest.start_install(False, meter = meter)
>>    File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install
>>      return self._do_install(consolecb, meter, removeOld, wait)
>>    File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in _do_install
>>      self.domain = self.conn.createLinux(install_xml, 0)
>>    File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in createLinux
>>      if ret is
>>   None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
>> libvirtError: Domain not found: xenUnifiedDomainLookupByName
>> '
>> What should i do to avoid it? please help!
>> Boris! How did you create PV guests using virt-manager i am following your article
>>   http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-dom0-on-to-fedora-11-64-bit/#comment-623
>> PFA, a screen-shot of the virt-manager
>>
>> Regards,
>> Fasiha Ashraf
>>
>
> CCing fedora-xen list.
>
> Rather than a screenshot, can you include:
>
> ~/.virt-manager/virt-manager.log
> virsh --connect xen:/// capabilities
> virsh --connect xen:/// version
>
> Thanks,
> Cole

 


Yahoo! India has a new look. Take a sneak peek.


-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel lists xensource com
http://lists.xensource.com/xen-devel

 


Add whatever you love to the Yahoo! India homepage. Try now!

 


Now, send attachments up to 25MB with Yahoo! India Mail. Learn how.


-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel lists xensource com
http://lists.xensource.com/xen-devel




Now, send attachments up to 25MB with Yahoo! India Mail. Learn how.



From cricket scores to your friends. Try the Yahoo! India Homepage!
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]