[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [virt-tools-list] iSCSI disk goes missing after domU installation



On Mon, Apr 16, 2012 at 1:29 PM, Konrad Rzeszutek Wilk <konrad wilk oracle com> wrote:
What is the disk that shows up in the guest? Is it hda or xvda?

Looks like xvda - see below output
 
Can you include the output of 'lspci' and 'dmesg' please?

See below ... I REALLY appreciate your help.  This was supposed to be a simple migration from VirtualBox to Xen and now I'm caught in this quagmire for a good week already :-(

sorry for making this rich text but if I don't gmail will reformat it into garbage ...

Disk /dev/xvda: 33418 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvda1          0+  32896-  32897- 264240128   83  Linux
/dev/xvda2      32896+  33418-    522-   4192257    5  Extended
/dev/xvda3          0       -       0          0    0  Empty
/dev/xvda4          0       -       0          0    0  Empty
/dev/xvda5      32896+  33418-    522-   4192256   82  Linux swap / Solaris

00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.2 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:01.3 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 SCSI storage controller: XenSource, Inc. Xen Platform Device (rev 01)



[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-20-generic (buildd allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #33-Ubuntu SMP Tue Mar 27 16:42:26 UTC 2012 (Ubuntu 3.2.0-20.33-generic 3.2.12)
[    0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000efffac00 (usable)
[    0.000000]  BIOS-e820: 00000000efffac00 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Red Hat HVM domU, BIOS 3.1.2-274.12.1.el5 02/28/2012
[    0.000000] Hypervisor detected: Xen HVM
[    0.000000] Xen version 3.1.
[    0.000000] Xen Platform PCI: I/O protocol version 1
[    0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[    0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[    0.000000] You might have to change the root device
[    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[    0.000000] in your root= kernel command line option
[    0.000000] HVMOP_pagetable_dying not supported
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 3800000000 write-back
[    0.000000]   1 base 0800000000 mask 3FC0000000 write-back
[    0.000000]   2 base 00C0000000 mask 3FC0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 32GB, type WB
[    0.000000] reg 1, base: 32GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] total RAM covered: 32768M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 64K         num_reg: 6      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 4GB, range: 4GB, type WB
[    0.000000] reg 3, base: 8GB, range: 8GB, type WB
[    0.000000] reg 4, base: 16GB, range: 16GB, type WB
[    0.000000] reg 5, base: 32GB, range: 1GB, type WB
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 767MB of RAM.
[    0.000000] update e820 for mtrr
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000c0000000 (usable)
[    0.000000]  modified: 00000000c0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000110000000 (usable)
[    0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000
[    0.000000] last_pfn = 0xc0000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcce0] fcce0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000c0000000
[    0.000000]  0000000000 - 00c0000000 page 2M
[    0.000000] kernel direct mapping tables up to c0000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000110000000
[    0.000000]  0100000000 - 0110000000 page 2M
[    0.000000] kernel direct mapping tables up to 110000000 @ bfffa000-c0000000
[    0.000000] RAMDISK: 7f1b2000 - 80000000
[    0.000000] ACPI: RSDP 00000000000eb350 00024 (v02    Xen)
[    0.000000] ACPI: XSDT 00000000000eb2c0 00044 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: FACP 00000000000eb0c0 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: DSDT 00000000000ea050 00FEA (v02    Xen      HVM 00000000 INTL 20110413)
[    0.000000] ACPI: FACS 00000000000ea010 00040
[    0.000000] ACPI: APIC 00000000000eb1c0 0007A (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: HPET 00000000000eb240 00038 (v01    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: SSDT 00000000000eb278 00045 (v02    Xen      HVM 00000000 HVML 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000110000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000110000000
[    0.000000]   NODE_DATA [000000010fffb000 - 000000010fffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010c200000-ffff88010f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00110000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000c0000
[    0.000000]     0: 0x00100000 -> 0x00110000
[    0.000000] On node 0 totalpages: 851855
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 766016 pages, LIFO batch:31
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 64512 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x1f48
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ7 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:10000000)
[    0.000000] Booting paravirtualized kernel on Xen HVM
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88010fc00000 s83072 r8192 d23424 u1048576
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 834442
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3257412k/4456448k available (6565k kernel code, 1049028k absent, 150008k reserved, 6639k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 27262976 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3000.170 MHz processor.
[    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.34 BogoMIPS (lpj=12000680)
[    0.008010] pid_max: default: 32768 minimum: 301
[    0.008038] Security Framework initialized
[    0.008071] AppArmor: AppArmor initialized
[    0.008073] Yama: becoming mindful.
[    0.009876] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014628] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015565] Mount-cache hash table entries: 256
[    0.015743] Initializing cgroup subsys cpuacct
[    0.015749] Initializing cgroup subsys memory
[    0.015758] Initializing cgroup subsys devices
[    0.015761] Initializing cgroup subsys freezer
[    0.015763] Initializing cgroup subsys blkio
[    0.015772] Initializing cgroup subsys perf_event
[    0.015864] mce: CPU supports 0 MCE banks
[    0.024503] ACPI: Core revision 20110623
[    0.025004] ftrace: allocating 27049 entries in 107 pages
[    0.033300] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072999] CPU0: Intel(R) Xeon(R) CPU           E5472  @ 3.00GHz stepping 0a
[    0.076004] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[    0.076004] NMI watchdog disabled (cpu0): hardware events not enabled
[    0.076004] register_vcpu_info failed: err=-38
[    0.076004] Booting Node   0, Processors  #1 Ok.
[    0.076004] smpboot cpu 1: start_ip = 9a000
[    0.012000] mce: CPU supports 0 MCE banks
[    0.168009] TSC synchronization [CPU#0 -> CPU#1]:
[    0.168009] Measured 1073 cycles TSC warp between CPUs, turning off TSC clock.
[    0.168009] Marking TSC unstable due to check_tsc_sync_source failed
[    0.184070] NMI watchdog disabled (cpu1): hardware events not enabled
[    0.184125] Brought up 2 CPUs
[    0.184127] Total of 2 processors activated (11998.78 BogoMIPS).
[    0.186920] devtmpfs: initialized
[    0.188598] EVM: security.selinux
[    0.188602] EVM: security.SMACK64
[    0.188603] EVM: security.capability
[    0.188770] print_constraints: dummy: 
[    0.188801] RTC time: 19:17:59, date: 04/16/12
[    0.188868] NET: Registered protocol family 16
[    0.188974] Trying to unpack rootfs image as initramfs...
[    1.192256] ACPI: bus type pci registered
[    1.192655] PCI: Using configuration type 1 for base access
[    1.193739] bio: create slab <bio-0> at 0
[    1.193847] ACPI: Added _OSI(Module Device)
[    1.193849] ACPI: Added _OSI(Processor Device)
[    1.193850] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.193852] ACPI: Added _OSI(Processor Aggregator Device)
[    1.194251] ACPI: EC: Look up EC in DSDT
[    1.195200] ACPI: Interpreter enabled
[    1.195204] ACPI: (supports S0 S5)
[    1.195215] ACPI: Using IOAPIC for interrupt routing
[    1.196641] ACPI: No dock devices found.
[    1.196643] HEST: Table not found.
[    1.196646] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.196675] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.196733] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    1.196735] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    1.196737] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.196739] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf4ffffff]
[    1.196879] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    1.197789] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    1.199126] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    1.199919] pci 0000:00:01.1: reg 20: [io  0xc000-0xc00f]
[    1.200590] pci 0000:00:01.2: [8086:7113] type 0 class 0x000680
[    1.201777] pci 0000:00:01.2: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI
[    1.202128] pci 0000:00:01.3: [8086:7020] type 0 class 0x000c03
[    1.202950] pci 0000:00:01.3: reg 20: [io  0xc020-0xc03f]
[    1.203608] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    1.203815] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[    1.203974] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[    1.205017] pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
[    1.205247] pci 0000:00:03.0: reg 10: [io  0xc100-0xc1ff]
[    1.205460] pci 0000:00:03.0: reg 14: [mem 0xf3000000-0xf3ffffff pref]
[    1.207642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.207783]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    1.210682] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[    1.210849] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[    1.211006] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[    1.211154] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
[    1.211263] xen/balloon: Initialising balloon driver.
[    1.211288] xen-balloon: Initialising balloon driver.
[    1.211427] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.211429] vgaarb: loaded
[    1.211431] vgaarb: bridge control possible 0000:00:02.0
[    1.211545] i2c-core: driver [aat2870] using legacy suspend method
[    1.211546] i2c-core: driver [aat2870] using legacy resume method
[    1.211609] SCSI subsystem initialized
[    1.211681] libata version 3.00 loaded.
[    1.211731] usbcore: registered new interface driver usbfs
[    1.211739] usbcore: registered new interface driver hub
[    1.211767] usbcore: registered new device driver usb
[    1.211874] PCI: Using ACPI for IRQ routing
[    1.211876] PCI: pci_cache_line_size set to 64 bytes
[    1.212340] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    1.212456] NetLabel: Initializing
[    1.212458] NetLabel:  domain hash size = 128
[    1.212459] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.212471] NetLabel:  unlabeled traffic allowed by default
[    1.212518] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.212526] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.212530] hpet0: 3 comparators, 64-bit 93.755157 MHz counter
[    2.036275] Switching to clocksource hpet
[    2.045234] AppArmor: AppArmor Filesystem Enabled
[    2.045282] pnp: PnP ACPI init
[    2.045305] ACPI: bus type pnp registered
[    2.045345] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    2.045399] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    2.045404] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.045460] pnp 00:01: [bus 00-ff]
[    2.045462] pnp 00:01: [io  0x0cf8-0x0cff]
[    2.045464] pnp 00:01: [io  0x0000-0x0cf7 window]
[    2.045466] pnp 00:01: [io  0x0d00-0xffff window]
[    2.045467] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    2.045469] pnp 00:01: [mem 0xf0000000-0xf4ffffff]
[    2.045738] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    2.045873] pnp 00:02: [io  0x10c0-0x10c2]
[    2.045875] pnp 00:02: [io  0xb044-0xb047]
[    2.045920] system 00:02: [io  0x10c0-0x10c2] has been reserved
[    2.045922] system 00:02: [io  0xb044-0xb047] has been reserved
[    2.045925] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.046285] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    2.046320] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    2.046339] pnp 00:04: [io  0x0010-0x001f]
[    2.046341] pnp 00:04: [io  0x0022-0x002d]
[    2.046342] pnp 00:04: [io  0x0030-0x003f]
[    2.046343] pnp 00:04: [io  0x0044-0x005f]
[    2.046345] pnp 00:04: [io  0x0062-0x0063]
[    2.046346] pnp 00:04: [io  0x0065-0x006f]
[    2.046352] pnp 00:04: [io  0x0072-0x007f]
[    2.046353] pnp 00:04: [io  0x0080]
[    2.046354] pnp 00:04: [io  0x0084-0x0086]
[    2.046356] pnp 00:04: [io  0x0088]
[    2.046357] pnp 00:04: [io  0x008c-0x008e]
[    2.046358] pnp 00:04: [io  0x0090-0x009f]
[    2.046360] pnp 00:04: [io  0x00a2-0x00bd]
[    2.046361] pnp 00:04: [io  0x00e0-0x00ef]
[    2.046363] pnp 00:04: [io  0x08a0-0x08a3]
[    2.046364] pnp 00:04: [io  0x0cc0-0x0ccf]
[    2.046365] pnp 00:04: [io  0x04d0-0x04d1]
[    2.046403] system 00:04: [io  0x08a0-0x08a3] has been reserved
[    2.046405] system 00:04: [io  0x0cc0-0x0ccf] has been reserved
[    2.046407] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    2.046410] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.046421] pnp 00:05: [dma 4]
[    2.046422] pnp 00:05: [io  0x0000-0x000f]
[    2.046424] pnp 00:05: [io  0x0081-0x0083]
[    2.046425] pnp 00:05: [io  0x0087]
[    2.046426] pnp 00:05: [io  0x0089-0x008b]
[    2.046428] pnp 00:05: [io  0x008f]
[    2.046429] pnp 00:05: [io  0x00c0-0x00df]
[    2.046430] pnp 00:05: [io  0x0480-0x048f]
[    2.046452] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.046461] pnp 00:06: [io  0x0070-0x0071]
[    2.046491] pnp 00:06: [irq 8]
[    2.046521] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.046529] pnp 00:07: [io  0x0061]
[    2.046556] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    2.046582] pnp 00:08: [irq 12]
[    2.046606] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    2.046620] pnp 00:09: [io  0x0060]
[    2.046621] pnp 00:09: [io  0x0064]
[    2.046634] pnp 00:09: [irq 1]
[    2.046664] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    2.046684] pnp 00:0a: [io  0x03f0-0x03f5]
[    2.046686] pnp 00:0a: [io  0x03f7]
[    2.046698] pnp 00:0a: [irq 6]
[    2.046700] pnp 00:0a: [dma 2]
[    2.046731] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
[    2.046755] pnp 00:0b: [io  0x03f8-0x03ff]
[    2.046767] pnp 00:0b: [irq 4]
[    2.046791] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.047320] pnp: PnP ACPI: found 12 devices
[    2.047322] ACPI: ACPI bus type pnp unregistered
[    2.054226] PCI: max bus depth: 0 pci_try_num: 1
[    2.054237] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    2.054239] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    2.054241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    2.054242] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xf4ffffff]
[    2.054313] NET: Registered protocol family 2
[    2.055021] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    2.057405] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    2.063469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    2.064446] TCP: Hash tables configured (established 524288 bind 65536)
[    2.064448] TCP reno registered
[    2.064499] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    2.064571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    2.064728] NET: Registered protocol family 1
[    2.064743] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    2.064867] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    2.064951] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    2.065113] pci 0000:00:01.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.065328] pci 0000:00:01.3: PCI INT D disabled
[    2.065413] pci 0000:00:02.0: Boot video device
[    2.065547] PCI: CLS 0 bytes, default 64
[    2.065550] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.065553] Placing 64MB software IO TLB between ffff8800bbffa000 - ffff8800bfffa000
[    2.065554] software IO TLB at phys 0xbbffa000 - 0xbfffa000
[    2.065975] audit: initializing netlink socket (disabled)
[    2.065987] type=2000 audit(1334603880.060:1): initialized
[    2.101326] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.135469] VFS: Disk quotas dquot_6.5.2
[    2.135531] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.136137] fuse init (API version 7.17)
[    2.136232] msgmni has been set to 6362
[    2.136557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.136581] io scheduler noop registered
[    2.136582] io scheduler deadline registered
[    2.136618] io scheduler cfq registered (default)
[    2.136718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.136738] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.137608] ERST: Table is not found!
[    2.137610] GHES: HEST is not enabled!
[    2.137724] xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[    2.151847] Grant table initialized
[    2.168623] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.169335] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
[    4.229777] Freeing initrd memory: 14648k freed
[    4.356747] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
[    4.360344] Linux agpgart interface v0.103
[    4.361967] brd: module loaded
[    4.362771] loop: module loaded
[    4.366485] blkfront device/vbd/768 num-ring-pages 1 nr_ents 32.
[    4.369412] blkfront: xvda: barrier or flush: disabled
[    4.370639] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
[    4.372272] ata_piix 0000:00:01.1: version 2.13
[    4.372530] ata_piix 0000:00:01.1: setting latency timer to 64
[    4.373182] scsi0 : ata_piix
[    4.373324] scsi1 : ata_piix
[    4.373369] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[    4.373371] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[    4.373746] Fixed MDIO Bus: probed
[    4.373774] tun: Universal TUN/TAP device driver, 1.6
[    4.373776] tun: (C) 1999-2004 Max Krasnyansky <maxk qualcomm com>
[    4.373874] PPP generic driver version 2.4.2
[    4.373916] Initialising Xen virtual ethernet driver.
[    4.382960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.382986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.382996] uhci_hcd: USB Universal Host Controller Interface driver
[    4.383119] uhci_hcd 0000:00:01.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    4.383210] uhci_hcd 0000:00:01.3: setting latency timer to 64
[    4.383241] uhci_hcd 0000:00:01.3: UHCI Host Controller
[    4.383297] uhci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 1
[    4.383548] uhci_hcd 0000:00:01.3: irq 23, io base 0x0000c020
[    4.385334] hub 1-0:1.0: USB hub found
[    4.385339] hub 1-0:1.0: 2 ports detected
[    4.385616] usbcore: registered new interface driver libusual
[    4.385729] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.387688] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.387707] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.388150] mousedev: PS/2 mouse device common for all mice
[    4.389070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.389301] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    4.389381] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    4.389787] device-mapper: uevent: version 1.0.3
[    4.389948] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel redhat com
[    4.389967] cpuidle: using governor ladder
[    4.389969] cpuidle: using governor menu
[    4.389971] EFI Variables Facility v0.08 2004-May-17
[    4.390227] TCP cubic registered
[    4.390350] NET: Registered protocol family 10
[    4.391165] NET: Registered protocol family 17
[    4.391188] Registering the dns_resolver key type
[    4.391551] PM: Hibernation image not present or could not be loaded.
[    4.391578] registered taskstats version 1
[    4.484188]  xvda: xvda1 xvda2 < xvda5 >
[    4.530243] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100
[    4.531594] ata2.00: configured for MWDMA2
[    4.532832] scsi 1:0:0:0: CD-ROM            QEMU     QEMU CD-ROM      0.8. PQ: 0 ANSI: 5
[    4.534783] ata2: drained 28 bytes to clear DRQ
[    4.534790] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[    4.534792] ata2.00: BMDMA stat 0x5
[    4.534797] sr 1:0:0:0: CDB: Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[    4.534808] ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[    4.534809]          res 48/00:02:00:1c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[    4.534812] ata2.00: status: { DRDY DRQ }
[    4.535090] ata2: soft resetting link
[    4.544051] XENBUS: Device with no driver: device/vbd/5632
[    4.544072]   Magic number: 8:923:293
[    4.544166] tty tty26: hash matches
[    4.544292] rtc_cmos 00:06: setting system clock to 2012-04-16 19:18:03 UTC (1334603883)
[    4.544332] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.544334] EDD information not available.
[    4.690401] ata2.00: configured for MWDMA2
[    4.690919] ata2: EH complete
[    4.690925] sr0: scsi-1 drive
[    4.690930] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.691146] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.691547] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    4.695622] Freeing unused kernel memory: 920k freed
[    4.695867] Write protecting the kernel read-only data: 12288k
[    4.701218] Freeing unused kernel memory: 1608k freed
[    4.705636] Freeing unused kernel memory: 1200k freed
[    4.972071] udevd[97]: starting version 175
[    5.644449] FDC 0 is a S82078B
[    7.737320] Btrfs loaded
[    7.819492] xor: automatically using best checksumming function: generic_sse
[    7.836028]    generic_sse:  9091.000 MB/sec
[    7.836031] xor: using function: generic_sse (9091.000 MB/sec)
[    7.838061] device-mapper: dm-raid45: initialized v0.2594b
[    8.317968] ISO 9660 Extensions: Microsoft Joliet Level 3
[    8.329407] ISO 9660 Extensions: RRIP_1991A
[    8.643834] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   23.701071] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.701078] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   23.856946] init: flush-early-job-log main process (1021) terminated with status 1
[   23.989372] udevd[1034]: starting version 175
[   24.833431] piix4_smbus 0000:00:01.2: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[   24.911896] Bluetooth: Core ver 2.16
[   24.915452] NET: Registered protocol family 31
[   24.915459] Bluetooth: HCI device and connection manager initialized
[   24.915462] Bluetooth: HCI socket layer initialized
[   24.915463] Bluetooth: L2CAP socket layer initialized
[   24.915474] Bluetooth: SCO socket layer initialized
[   25.001996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.001999] Bluetooth: BNEP filters: protocol multicast
[   25.008073] Bluetooth: RFCOMM TTY layer initialized
[   25.008080] Bluetooth: RFCOMM socket layer initialized
[   25.008082] Bluetooth: RFCOMM ver 1.11
[   25.509341] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[   28.181924] init: failsafe main process (1234) killed by TERM signal
[   28.831122] device-mapper: multipath: version 1.3.0 loaded
[   38.498388] eth1: no IPv6 routers present
[   38.721221] eth0: no IPv6 routers present
[   40.406454] lp: driver loaded but no devices found
[   40.676839] init: udev-fallback-graphics main process (1644) terminated with status 1
[   41.211607] ppdev: user-space parallel port driver
[   51.331823] mtrr: no MTRR for f0000000,100000 found
[   62.326676] init: plymouth-upstart-bridge main process (1055) killed by TERM signal
[  146.123642] gnome-settings-[2764]: segfault at 18 ip 00007fe28a66bd89 sp 00007fff8723c630 error 4 in libgnome-desktop-3.so.2.1.3[7fe28a657000+27000]
[  193.153194] mtrr: no MTRR for f0000000,400000 found
[  197.270951] mtrr: no MTRR for f0000000,100000 found





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]