[Virtio-fs] [QUESTION] A performance problem for buffer write compared with 9p
wangyan
wangyan122 at huawei.com
Thu Aug 22 13:17:21 UTC 2019
On 2019/8/22 21:07, Miklos Szeredi wrote:
> On Thu, Aug 22, 2019 at 2:48 PM wangyan <wangyan122 at huawei.com> wrote:
>>
>> On 2019/8/22 19:43, Miklos Szeredi wrote:
>>> On Thu, Aug 22, 2019 at 2:59 AM wangyan <wangyan122 at huawei.com> wrote:
>>>> I will test it when I get the patch, and post the compared result with
>>>> 9p.
>>>
>>> Could you please try the attached patch? My guess is that it should
>>> improve the performance, perhaps by a big margin.
>>>
>>> Further improvement is possible by eliminating page copies, but that
>>> is less trivial.
>>>
>>> Thanks,
>>> Miklos
>>>
>> Using the same test model. And the test result is:
>> 1. Latency
>> virtiofs: avg-lat is 15.40 usec, bigger than before(6.64 usec).
>> 4K: (g=0): rw=write, bs=4K-4K/4K-4K/4K-4K, ioengine=psync, iodepth=1
>> fio-2.13
>> Starting 1 process
>> Jobs: 1 (f=1): [W(1)] [100.0% done] [0KB/142.4MB/0KB /s] [0/36.5K/0
>> iops] [eta 00m:00s]
>> 4K: (groupid=0, jobs=1): err= 0: pid=5528: Thu Aug 22 20:39:07 2019
>> write: io=6633.2MB, bw=226404KB/s, iops=56600, runt= 30001msec
>> clat (usec): min=2, max=40403, avg=14.77, stdev=33.71
>> lat (usec): min=3, max=40404, avg=15.40, stdev=33.74
>>
>> 2. Bandwidth
>> virtiofs: bandwidth is 280840KB/s, lower than before(691894KB/s).
>> 1M: (g=0): rw=write, bs=1M-1M/1M-1M/1M-1M, ioengine=psync, iodepth=1
>> fio-2.13
>> Starting 1 process
>> Jobs: 1 (f=1): [f(1)] [100.0% done] [0KB/29755KB/0KB /s] [0/29/0 iops]
>> [eta 00m:00s]
>> 1M: (groupid=0, jobs=1): err= 0: pid=5550: Thu Aug 22 20:41:28 2019
>> write: io=8228.0MB, bw=280840KB/s, iops=274, runt= 30001msec
>> clat (usec): min=362, max=11038, avg=3571.33, stdev=1062.72
>> lat (usec): min=411, max=11093, avg=3628.39, stdev=1064.53
>>
>> According to the result, the patch doesn't work and make it worse than
>> before.
>
> Is server started with "-owriteback"?
>
> Thanks,
> Miklos
>
> .
>
I used these commands:
virtiofsd cmd:
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/mnt/share/
-o cache=always -o writeback
mount cmd:
mount -t virtio_fs myfs /mnt/virtiofs -o
rootmode=040000,user_id=0,group_id=0
Thanks,
Yan Wang
More information about the Virtio-fs
mailing list