[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: Half of the screen. Help please.



> I try with redhat 6.2 and redhat 7.0. It's the same problem.
> When i see the half screen the pc work, i can move the mouse and the pc
> work, but i cant close, when i try to close, the screen turn white and
die.
> When the pc work, if I try to move to oder console with crlt +f1, the
screen
> turn white. Allways the screen turn white.
>
> The Output of the "lspci -v" command is:
>
> 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0601 (rev 05)
>  Flags: bus master, medium devsel, latency 0
>  Memory at f8000000 (32-bit, prefetchable)
>  Capabilities: [a0] AGP version 2.0
>
> 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8601 (prog-if
00
> [Normal decode])
>  Flags: bus master, 66Mhz, medium devsel, latency 0
>  Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>  Memory behind bridge: f4100000-f57fffff
>
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev
22)
>  Subsystem: VIA Technologies, Inc.: Unknown device 0000
>  Flags: bus master, stepping, medium devsel, latency 0
>
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
10)
> (prog-if 8a [Master SecP PriP])
>  Flags: bus master, medium devsel, latency 64
>  I/O ports at 1420
>  Capabilities: [c0] Power Management version 2
>
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> (prog-if 00 [UHCI])
>  Subsystem: Unknown device 0925:1234
>  Flags: medium devsel, IRQ 11
>  I/O ports at 1400
>  Capabilities: [80] Power Management version 2
>
> 00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev
> 30)
>  Flags: medium devsel
>  Capabilities: [68] Power Management version 2
>
> 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
[Apollo
> Super AC97/Audio] (rev 20)
>  Subsystem: Compaq Computer Corporation: Unknown device b194
>  Flags: medium devsel, IRQ 9
>  I/O ports at 1000
>  I/O ports at 1434
>  I/O ports at 1430
>  Capabilities: [c0] Power Management version 2
>
> 00:09.0 Communication controller: CONEXANT HSP MicroModem 56K (rev 01)
>  Subsystem: Compaq Computer Corporation: Unknown device b195
>  Flags: medium devsel, IRQ 11
>  Memory at f4000000 (32-bit, non-prefetchable)
>  I/O ports at 1438
>  Capabilities: [40] Power Management version 2
>
> 00:0a.0 CardBus bridge: Texas Instruments: Unknown device ac50 (rev 01)
>  Subsystem: Compaq Computer Corporation: Unknown device b103
>  Flags: bus master, medium devsel, latency 168
>  Memory at <ignored> (32-bit, non-prefetchable)
>  Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
>  I/O window 0: 00000000-00000003
>  I/O window 1: 00000000-00000003
>  16-bit legacy interface ports at 0001
>
> 01:00.0 VGA compatible controller: Trident Microsystems: Unknown device
8520
> (rev 6a) (prog-if 00 [VGA])
>  Subsystem: Compaq Computer Corporation: Unknown device b16e
>  Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 64, IRQ
9
>  Memory at f5000000 (32-bit, non-prefetchable)
>  Memory at f4100000 (32-bit, non-prefetchable)
>  Memory at f4800000 (32-bit, non-prefetchable)
>  Capabilities: [80] AGP version 1.0
>  Capabilities: [90] Power Management version 1
>
> 20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
> 10)
>  Subsystem: Billionton Systems Inc: Unknown device 0200
>  Flags: medium devsel
>  I/O ports at <unassigned> [disabled]
>  Memory at <ignored> (32-bit, non-prefetchable)
>  Capabilities: [50] Power Management version 2
>
>
>
>
> ----- Original Message -----
> From: David Sainty <dsainty redhat com>
> To: Damian <damian vetas com>
> Cc: <xfree86-list redhat com>
> Sent: Tuesday, August 14, 2001 2:19 PM
> Subject: Re: Half of the screen. Help please.
>
>
> > On Tue, Aug 14, 2001 at 01:56:08PM -0300, Damian wrote:
> >
> > > I have a Notebook Compaq Presario 1200.
> > > Video driver: Triden cybreblade
> > > Monitor: TFT450 Compaq
> > >
> > > I have problem with the xfree. Only appears a half of the screen and
> then the pc die. But, when I install the linux, in the prewiew of the
> monitor, it's ok, I saw all the screen.
> > > I think I have problems with the clock.
> > > Can you help me please!!!
> >
> > You will have to let us know:
> >
> > - What version of Red Hat Linux you are using.
> > - The version of XFree86 you are using (if you have changed the
version).
> >
> > Other information that will help a lot:
> >
> > - Output of the "lspci -v" command.
> > - Describe exactly how the computer "dies".
> >
> > Please consider using Bugzilla (http://bugzilla.redhat.com/bugzilla/ )
to
> > report this issue. (I have assumed throughout this e-mail that you are
> > indeed using Red Hat Linux.)
> >
> > Thanks for using Linux! :-)
> >
> > Regards,
> >
> >
> > DS..
> >
> >
>
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]