订阅内容

Energy saving and sustainability have become a top priority for service providers worldwide. Whether mandated to meet certain long-term net neutrality goals imposed by national climate action plans, or driven by soaring energy prices, service providers are seeking options to improve their energy footprint and establish a sustainable, environment-friendly operation.

Focusing on their network to reduce energy consumption is a logical choice, as a large portion of carbon emissions is generated from electricity consumed by mobile network base stations, communication station premises and data centers. Further increases are anticipated as the rollout of 5G continues and communications traffic volumes grow over time.

High energy-consuming network architectures

Conventional approaches for improving the energy footprint in data centers include adapting workload resources according to their demand by means of auto-scaling and dynamic scheduling. This approach is hard to implement in service provider networks where cloud-native network functions (CNFs) are typically deployed on specific CPU cores and given special access to system resources to maximize their performance. The 5G core UPF is one of these CNFs.

Polling and the use of the data plane development kit (DPDK) is a key mechanism used in the 5G UPF to deliver deterministic performance. By design, polling is oblivious to the load level of the 5G UPF. The associated CPU cores will always run at their highest utilization, even when the UPF is idle or receiving the lowest amount of traffic. The result is 5G UPFs always consume the maximum possible power.

Innovative reduction of energy consumption

To mitigate the energy impact of polling in DPDK workloads, Intracom Telecom has added the frequency feedback loop (FFL) feature to its NFV-RI™ solution. FFL dynamically selects the most efficient CPU frequency based on current demand, and is able to precisely determine how the traffic load of a DPDK-based CNF will vary in the very short term. FFL will adjust the frequency of CPU cores to reduce energy consumption without dropping packets. This creates opportunities for power savings and consequently reduced carbon emissions. 

In contrast to conventional energy-saving approaches, FFL can be applied transparently to a 5G UPF. No CNF modifications or the need to re-engineer deployment and traffic are necessary. There is no loss in performance as low latency is maintained and no packets are dropped, and FFL has minimal resource overhead (less than 50% of a single CPU core).

How Red Hat and Intracom Telecom can help

Red Hat and Intracom Telecom have collaborated to create a fully integrated and certified NFV-RI and Red Hat OpenShift solution to ensure streamlined deployment and stable implementation for service provider environments. Using NFV-RI on OpenShift enables 5G UPF workloads to take full advantage of power management capabilities to optimize overall energy consumption.

To accelerate the evaluation and adoption of the joint solution, Red Hat and Intracom Telecom have published a reference architecture on how to improve the energy footprint of the 5G UPF through an easily reproducible process. The reference architecture includes installation and deployment instructions, configuration options and Helm charts for the open-source components used as reference workloads (5G UPFs and traffic generators). 

The reference architecture also includes two common 5G data center use cases:

  • Centralized 5G core deployments with fully-loaded UPF nodes
  • 5G edge deployments with mixed-workload nodes

Both of these use cases are based on the open mobile evolved core (OMEC) 5G UPF distribution. In each, total savings in server power is reported for a real-world 24-hour traffic pattern. The fully-loaded use case achieves over 25% savings and the mixed-workload use case achieves over 15%.


关于作者

William is a seasoned professional with 25 years of experience enabling Telco business transformation through emerging technologies. He works with Telco and MSO partners and customers at the forefront of digital disruption on architecting solutions that transform markets. 

Read full bio

Nikos Anastopoulos is a Solutions Architect at Intracom Telecom in the areas of NFV and Telco Network Transformation. He is currently the Product Manager of the NFV Resource Intelligence (NFV-RI) solution, and his focus is on technologies that seek to improve the energy and resource footprint of telco cloud deployments. Before joining Intracom Telecom he worked as a research associate in the fields of computer architecture and high-performance computing. He holds a Ph.D. in Computer Engineering from the National Technical University of Athens.

Read full bio
UI_Icon-Red_Hat-Close-A-Black-RGB

按频道浏览

automation icon

自动化

有关技术、团队和环境 IT 自动化的最新信息

AI icon

人工智能

平台更新使客户可以在任何地方运行人工智能工作负载

open hybrid cloud icon

开放混合云

了解我们如何利用混合云构建更灵活的未来

security icon

安全防护

有关我们如何跨环境和技术减少风险的最新信息

edge icon

边缘计算

简化边缘运维的平台更新

Infrastructure icon

基础架构

全球领先企业 Linux 平台的最新动态

application development icon

应用领域

我们针对最严峻的应用挑战的解决方案

Original series icon

原创节目

关于企业技术领域的创客和领导者们有趣的故事