订阅内容

Red Hat Satellite is a powerful content management and provisioning tool that you can add to any Red Hat Enterprise Linux (RHEL) subscription with the addition of a Satellite subscription. With Red Hat Satellite you can curate specific content across multiple lifecycle environments throughout your entire RHEL environment whether it is on-prem, in the cloud or hybrid. In fact you can use Red Hat Satellite with your market-place instances of RHEL.

In this multi-part tutorial we will cover how to provision RHEL VMs to a vSphere environment from Red Hat Satellite. We will focus on provisioning RHEL 8.3 VMs in one lifecycle environment, but you can easily adapt what you learn here to provision other RHEL versions.

In part 1, I'm documenting the steps for a simple "lab" install of Satellite 6.9. The purpose of this setup is to give you a quick hands-on experience with Satellite. The lab infrastructure is deployed to a small vSphere 6.7 lab environment with three EXSi servers that have internet access for the installation. 

For this lab, Satellite will provide DNS and DHCP services for the network that is hosting the vSphere environment. Note: Satellite can be configured to work with ISC compliant DNS and DHCP services. Also, in a production environment you would also want to configure Satellite to interact with your directory/security services.

I would recommend creating a local time server and configuring all systems in this lab environment to use the same local time source.

Pre-Reqs

Create a VM for Satellite and install RHEL 7.9. The VM was sized with 4 vCPUS, 20GB RAM and 400GB "local" drive. Note: For this example I have enabled Simple Content Access (SCA) on the Red Hat Customer portal and do not need to attach a subscription to the RHEL or Satellite repositories. After you have created and started the RHEL 7.9 VM, we will ssh to the RHEL VM and work from the command line.

For this lab environment I chose sat01.example.com for the hostname of the server hosting Satellite.

You will need a DNS server running to support the installation of Satellite. After installing Satellite, we will use the DNS service on Satellite.

Check hostname and local DNS resolution. Use dig to test forward and reverse lookup of the server hosting Satellite. If the Satellite hostname is not available from DNS, the initial installation will fail.

# ping -c3 localhost
# ping -c3 `hostname -f`
# dig sat01.example.com +short
# dig -x 10.1.10.253 +short

Register Satellite Server to Red Hat Subscription Management service.

# sudo subscription-manager register --org=<org id> --activationkey=<activation key>

You can verify the registration with the following command.

# sudo subscription-manager status

Configure and enable repositories

With SCA, we still need to enable relevant repositories for our RHEL instances. Following steps will walk you through enabling repos.

Disable all repos.

# sudo subscription-manager repos --disable "*"

Enable the following repositories. 

# sudo subscription-manager repos --enable=rhel-7-server-rpms \ 
--enable=rhel-7-server-satellite-6.9-rpms \ 
--enable=rhel-7-server-satellite-maintenance-6-rpms \ 
--enable=rhel-server-rhscl-7-rpms \ 
--enable=rhel-7-server-ansible-2.9-rpms

Clear any meta-data.

# sudo yum clean all

Verify that repositories are enabled.

# sudo yum repolist enabled
# sudo subscription-manager repos --list-enabled

Update the RHEL 7.9 instance and finish server setup

Install all patches on your RHEL 7.9 instance.

# sudo yum -y update

I would also recommend registering this server to Insights.

# yum -y install insights-client
# insights-client --enable

Install SOS package on base OS for initial systems analysis in case you need to collect problem determination for any system related issues.

# sudo yum install sos

Update the firewall rules for Satellite.

# sudo firewall-cmd \
--add-port="80/tcp" --add-port="443/tcp" \
--add-port="5647/tcp" --add-port="8000/tcp" \
--add-port="8140/tcp" --add-port="9090/tcp" \
--add-port="53/udp" --add-port="53/tcp" \
--add-port="67/udp" --add-port="69/udp" \
--add-port="5000/tcp"

Make the firewall changes permanent

# sudo firewall-cmd --runtime-to-permanent

Verify the firewall changes

# sudo firewall-cmd --list-all

Setup system Clock with chrony. I have a local time server that my systems use for synching time. Type the following command to check the the time synch status.

# chronyc sources -v

Satellite Installation

Install Satellite Server packages and then install Satellite.

# sudo yum install satellite

We will run satellite-installer to create a userid and password along with the information to configure the DNS, DHCP and TFTP services. This will take several minutes to complete.

# satellite-installer --scenario satellite \
--foreman-initial-admin-username admin \
--foreman-initial-admin-password Passw0rd! \
--foreman-proxy-dhcp true \
--foreman-proxy-dhcp-managed true \
--foreman-proxy-dhcp-gateway "10.1.10.1" \
--foreman-proxy-dhcp-interface "ens192" \
--foreman-proxy-dhcp-nameservers "10.1.10.254" \
--foreman-proxy-dhcp-range "10.1.10.149 10.1.10.199" \
--foreman-proxy-dhcp-server "10.1.10.254" \
--foreman-proxy-dns true \
--foreman-proxy-dns-managed true \
--foreman-proxy-dns-forwarders "10.1.1.254" \
--foreman-proxy-dns-interface "ens192" \
--foreman-proxy-dns-reverse "10.1.10.in-addr.arpa" \
--foreman-proxy-dns-server "127.0.0.1" \
--foreman-proxy-dns-zone "example.com" \
--foreman-proxy-tftp true \
--foreman-proxy-tftp-managed true

If the installation is progressing successfully, your screen output will look similar to the following example.

2021-11-03 15:48:05 [NOTICE] [root] Loading default values from puppet modules...
2021-11-03 15:48:08 [NOTICE] [root] ... finished
2021-11-03 15:48:09 [NOTICE] [root] Running validation checks
2021-11-03 15:50:50 [NOTICE] [configure] Starting system configuration.
  The total number of configuration tasks may increase during the run.
  Observe logs or specify --verbose-log-level to see individual configuration tasks.
2021-11-03 15:51:01 [NOTICE] [configure] 100 out of 2460 done.
2021-11-03 15:51:01 [NOTICE] [configure] 200 out of 2460 done.
2021-11-03 15:51:22 [NOTICE] [configure] 300 out of 2460 done.
2021-11-03 15:52:12 [NOTICE] [configure] 400 out of 2460 done.
...
2021-11-03 16:06:20 [NOTICE] [configure] 3000 out of 3300 done.
2021-11-03 16:06:31 [NOTICE] [configure] 3100 out of 3300 done.
2021-11-03 16:08:06 [NOTICE] [configure] 3200 out of 3300 done.
2021-11-03 16:08:31 [NOTICE] [configure] System configuration has finished.
  Success!
  * Satellite is running at https://sat01.example.com
      Initial credentials are admin / Passw0rd!

  * To install an additional Capsule on separate machine continue by running:

      capsule-certs-generate --foreman-proxy-fqdn "$CAPSULE" --certs-tar "/root/$CAPSULE-certs.tar"
  * Capsule is running at https://sat01.example.com:9090

  The full log is at /var/log/foreman-installer/satellite.log
Package versions are being locked.

Remember that early I said that we will use Satellite for DNS services. After completing the install above, I change the IP address of my server hosting Satellite and rerun the satellite-installer to update the ip address for the --foreman-proxy-dns-server option.

# satellite-installer --scenario satellite \
--foreman-proxy-dns-server "10.1.10.254"

Use the following command to find the name of the Satellite server you just updated.

# hammer proxy list

See which services are configured on your Satellite server. We want to verify that the DNS and DHCP services are enabled.

# hammer proxy info --name sat01.example.com

If services such as DNS or DHCP are not part of the output from the previous command, try refreshing the Satellite features.

# hammer proxy refresh-features --name sat01.example.com

Log in to the Satellite console

We can now launch and login to the Satellite console by entering http://sat01.example.com for the Satellite url. Satellite will redirect the browser to Satellite's secure login page. You will need to accept Satellite's certificate for your browser.

For this example we are using a local login. For production work you will want to integrate your directory service with Satellite. Enter the user id and password and click the Login button.

You are now at the Satellite home screen.

In our next post we'll cover how to create and use a Satellite manifest. Stay tuned!

References


Provisioning RHEL virtual machines to vSphere from Red Hat Satellite

Isometric thumbnail image, abstract In this multi-part tutorial, we cover how to provision Red Hat Enterprise Linux (RHEL) virtual machines (VMs) to a vSphere environment from Red Hat Satellite. Missed any steps in the series? Check them out:

 

关于作者

Paul Lucas is a Chicagoland-based Red Hat Solutions Architect working with a variety of enterprise businesses. A 21 year technical sales veteran, Paul was previously a customer working at a benefits consulting firm, where he advised development teams on the use of Java and the then-emerging Java EE.

Read full bio
UI_Icon-Red_Hat-Close-A-Black-RGB

按频道浏览

automation icon

自动化

有关技术、团队和环境 IT 自动化的最新信息

AI icon

人工智能

平台更新使客户可以在任何地方运行人工智能工作负载

open hybrid cloud icon

开放混合云

了解我们如何利用混合云构建更灵活的未来

security icon

安全防护

有关我们如何跨环境和技术减少风险的最新信息

edge icon

边缘计算

简化边缘运维的平台更新

Infrastructure icon

基础架构

全球领先企业 Linux 平台的最新动态

application development icon

应用领域

我们针对最严峻的应用挑战的解决方案

Original series icon

原创节目

关于企业技术领域的创客和领导者们有趣的故事