Abonnez-vous au flux

Peer-pods is a new Red Hat OpenShift feature that enables an OpenShift sandboxed container (OSC) running on a bare-metal deployment to run on OpenShift in a public cloud and on VMware. It's not uncommon to want to run OpenShift in a virtual machine instead of on the bare-metal nodes. While it's possible to run a virtual machine inside a virtual machine, it demands a whole new subset of support concerns when you do it in production. In this article, I'll demonstrate how to solve this problem, using a combination of peer-pods and libvirt. By the end of this tutorial, you'll know how to create a VM image for a peer-pod deployment, and how to run a workload in a peer-pod using the host's libvirt.

Peer-pod libvirt support is still experimental. It's not officially supported by Red Hat, but I encourage you to experiment and share your feedback to improve the peer-pods solution. This article assumes you're familiar with Red Hat OpenShift and the libvirt provider.

The advantage of peer-pods

A peer-pod isn't restricted to just a cloud provider. It can be deployed on-premise in a locally installed OpenShift cluster. The architecture remains the same, together with all the benefits explained in the peer-pods solution overview blog. Once you've proven the solution is viable, you can enjoy those benefits in an on-premise OpenShift install.

Setup

To follow along with this tutorial, you need:

  • git
  • tar
  • podman
  • libvirt
  • virsh

Additionally, you must have an OpenShift cluster, version 4.13 or higher. For the purpose of this guide, I assume the cluster was created using kcli. You must have this information about your cluster available:

  • Network name (LIBVIRT_NET_NAME): kcli list network
  • IP address (LIBVIRT_NET_IP): kcli list network
  • Pool name (LIBVIRT_POOL_NAME): virsh -c qemu:///system pool-list
  • SSH keys (LIBVIRT_KEY_PUB and LIBVIRT_KEY_PRIV): This can be provided by kcli or it can be generated using OpenSSH
  • Vxlan port (9000 by default)

Download the image

You need a virtual image that can run in libvirt. You'll invoke this image on the guest VM instead of the host bare-metal server. I recommend either CentOS or RHEL.

CentOS image

$ export IMAGE_PROVIDER=centos
$ export ARCH=amd64
$ curl \
https://raw.githubusercontent.com/confidential-containers/cloud-api-adaptor/v0.5.0/podvm/hack/download-image.sh | bash -s \
quay.io/confidential-containers/podvm-generic-$IMAGE_PROVIDER-$ARCH . \
-o podvm-amd64.qcow2'*.tar'

This creates an image file called podvm-amd64.qcow2.

RHEL image

For a RHEL 8 or 9 image, follow the steps shown in peer-pods solution overview blog. At the end of the process, you have a qcow2 image. For the purpose of this guide, name the image podvm-amd64.qcow2.

Set default image

Next, set the default image:

$ export IMAGE=path/to/podvm-amd64.qcow2
$ virsh -c qemu:///system vol-create-as --pool default \
--name podvm-base.qcow2 --capacity 20G \
--allocation 2G --prealloc-metadata --format qcow2
$ virsh -c qemu:///system vol-upload --vol podvm-base.qcow2 \
$IMAGE --pool default --sparse

Should this step fail because podvm-base.qcow2 already exists, topy the existing podvm-base.qcow2 file and rename it:

$ NEW_PODVM_NAME=podvm-base-centos.qcow2
$ virsh -c qemu:///system vol-clone \
podvm-base.qcow2 $NEW_PODVM_NAME --pool default

Then delete podvm-base.qcow2:

$ virsh -c qemu:///system vol-delete podvm-base.qcow2 --pool default

And then recreate podvm-base.qcow2 as demonstrated previously.

Verify that the image has been set:

$ virsh -c qemu:///system vol-info --pool default podvm-base.qcow2
Name: podvm-base.qcow2
Type: file
Capacity: 6.00 GiB
Allocation: 631.52 MiB

Deploy the OSC operator

To deplay the 1.4.0 operator, go to the marketplace and install it. For step-by-step instructions, read the official installation guide.

The libvirt provider is not currently supported officially in OSC 1.4.0, so you must update the internal coud-api-adaptor (CAA) to an upstream version:

$ export UPSTREAM_CAA=quay.io/confidential-containers/cloud-api-adaptor:latest
$ oc set image ds/peerpodconfig-ctrl-caa-daemon \
-n openshift-sandboxed-containers-operator \
cc-runtime-install-pod=$UPSTREAM_CAA

Collect peer-pods configuration parameters for libvirt

Now you must prepare the operator to run with peer-pods.

  1. First, create and deploy a peer-pods Secret YAML definition:
cat > peer-pods-secret.yaml <<EOF
apiVersion: v1
kind: Secret
metadata:
  name: peer-pods-secret
  namespace: openshift-sandboxed-containers-operator
type: Opaque
stringData:
  CLOUD_PROVIDER: "libvirt"
  VXLAN_PORT: "${LIBVIRT_VXLAN_PORT}"
  LIBVIRT_URI: "qemu+ssh://root@${LIBVIRT_NET_IP}.1/system?no_verify=1"
  LIBVIRT_NET: "${LIBVIRT_NET_NAME}"
  LIBVIRT_POOL: "${LIBVIRT_POOL_NAME}"
EOF

$ oc apply -f peer-pods-secret.yaml
  1. Create and deploy the peer-pods ConfigMap YAML definition:
$ cat > peer-pods-config-map.yaml <<EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: peer-pods-cm
  namespace: openshift-sandboxed-containers-operator
data:
  CLOUD_PROVIDER: "libvirt"
EOF
$ oc apply -f peer-pods-config-map.yaml
  1. You need an SSH key. The Kubernetes Secret contains the private key, which the CAA pod uses to connect to the host's libvirt, which in turn has the public key in /root/.ssh/authorized_keys.
$ oc create secret generic ssh-key-secret \
-n openshift-sandboxed-containers-operator \
--from-file=id_rsa.pub=${LIBVIRT_KEY_PUB} \
--from-file=id_rsa=${LIBVIRT_KEY_PRIV}

Alternatively, if no is LIBVIRT_KEY_* is present, you can generate one and add it to /root/.ssh/authorized_keys:

$ ssh-keygen -f ./id_rsa -N ""
$ oc create secret generic ssh-key-secret \
-n openshift-sandboxed-containers-operator \
--from-file=id_rsa.pub=./id_rsa.pub \
--from-file=id_rsa=./id_rsa

If you need to modify any of the parameters in the peer-pods-cm and peer-pods-secret objects, you can change values in the respective YAML files, and then deploy the files using oc apply -f example.yaml. Restart the cloud-api-adaptor pods with:

$ oc set env ds/peerpodconfig-ctrl-caa-daemon \
-n openshift-sandboxed-containers-operator \
REBOOT="$(date)"

Set up the peer-pods

You're ready to run peer-pods.

First, create KataConfig CRD from the Openshift Sandboxed Containers operator page, or deploy KataConfig from the terminal:

$ cat > kataconfig.yaml <<EOF
apiVersion: kataconfiguration.openshift.io/v1
kind: KataConfig
metadata:
  name: example-kataconfig
spec:
  enablePeerPods: true
EOF
$ oc apply -f kataconfig.yaml

Wait for installation to complete:

$ oc wait --for=condition=Updating=false \
machineconfigpool/kata-oc --timeout=-1s
$ oc rollout status daemonset peerpodconfig-ctrl-caa-daemon \
-n openshift-sandboxed-containers-operator --timeout=60s

If you're using the web console, switch to the openshift-sandboxed-containers-operator namespace and navigate to Workloads > Pods. Depending on your cluster setup, there are at least controller-manager-{} and peerpodconfig-ctrl-caa-daemon-{} pods in the Running state.

Next, you must update the coud-api-adaptor (CAA). Wait until the peerpodconfig-ctrl-caa-daemon-{*} objects are created. They're likely to show up in the Error/CrashBackLoop state, because the default operator doesn't accept libvirt as a cloud provider. To solve this issue, update the CAA to use the upstream code:

$ UPSTREAM_CAA=quay.io/confidential-containers/cloud-api-adaptor:latest
$ oc set image ds/peerpodconfig-ctrl-caa-daemon \
-n openshift-sandboxed-containers-operator \
cc-runtime-install-pod=$UPSTREAM_CAA

After that, the pods automatically restart. This can take some time, so be patient and monitor your cluster using your browser or the oc wait command.

After the installation's complete, you have two runtime classes:

  • kata: Creates sandboxed containers using Qemu and KVM. This one is created by default.
  • kata-remote-cc: Creates sandboxed containers using peer-pods.

Peer-pods has been installed!

Run a peer-pod workload

Now that you've installed peer-pods, you can run your first pod. The example hello-openshift web application prints "Hello OpenShift!" to visitors. Try it out.

  1. Create a hello-openshift.yaml file with the following contents:
apiVersion: v1
kind: Pod
metadata:
  name: hello-openshift
  labels:
    app: hello-openshift
spec:
  runtimeClassName: kata-remote-cc
  containers:
    - name: hello-openshift
      image: quay.io/openshift/origin-hello-openshift
      ports:
        - containerPort: 8888
      securityContext:
        privileged: false
        allowPrivilegeEscalation: false
        runAsNonRoot: true
        runAsUser: 1001
        capabilities:
          drop:
            - ALL
        seccompProfile:
          type: RuntimeDefault
---
kind: Service
apiVersion: v1
metadata:
  name: hello-openshift-service
  labels:
    app: hello-openshift
spec:
  selector:
    app: hello-openshift
  ports:
    - port: 8888
  1. Deploy it:
$ oc apply -f hello-openshift.yaml
$ oc get pod/hello-openshift
  1. Create an OpenShift route:
$ oc expose service hello-openshift-service -l app=hello-openshift
$ export APP_URL=$(oc get routes/hello-openshift-service -o jsonpath='{.spec.host}')

Done! Now verify that the application is responding:

$ curl ${APP_URL}

Inspecting peer-pods

To learn how to inspect peer-pods to gain insight into how and what they're running, read this article.

Undeploy peer-pods

To undeploy your peer-pods:

  1. Delete hello-openshift:
$ oc delete all -l app=hello-openshift
  1. Delete kataconfig:
$ oc delete kataconfigs/example-kataconfig \
-n openshift-sandboxed-containers-operator

If this command hangs, do NOT cancel the command. In a separate terminal, run oc edit kataconfigs/example-kataconfig and remove the section called "finalizers".

  1. Delete ConfigMap:
$ oc delete configmaps/peer-pods-cm \
-n openshift-sandboxed-containers-operator
  1. Delete PeerPodsSecret:
$ oc delete secrets/peer-pods-secret \
-n openshift-sandboxed-containers-operator
  1. Delete the operator from the Openshift Marketplace.

Conclusion

You've installed and deployed peer-pods, and tested a simple example web application. For further information, refer to part one and part two of this series.


À propos de l'auteur

Emanuele Giuseppe Esposito is a Software Engineer at Red Hat, with focus on Confidential Computing, QEMU and KVM. He joined Red Hat in 2021, right after getting a Master Degree in CS at ETH Zürich. Emanuele is passionate about the whole virtualization stack, ranging from Openshift Sandboxed Containers to low-level features in QEMU and KVM.

Read full bio

Parcourir par canal

automation icon

Automatisation

Les dernières nouveautés en matière d'automatisation informatique pour les technologies, les équipes et les environnements

AI icon

Intelligence artificielle

Actualité sur les plateformes qui permettent aux clients d'exécuter des charges de travail d'IA sur tout type d'environnement

open hybrid cloud icon

Cloud hybride ouvert

Découvrez comment créer un avenir flexible grâce au cloud hybride

security icon

Sécurité

Les dernières actualités sur la façon dont nous réduisons les risques dans tous les environnements et technologies

edge icon

Edge computing

Actualité sur les plateformes qui simplifient les opérations en périphérie

Infrastructure icon

Infrastructure

Les dernières nouveautés sur la plateforme Linux d'entreprise leader au monde

application development icon

Applications

À l’intérieur de nos solutions aux défis d’application les plus difficiles

Original series icon

Programmes originaux

Histoires passionnantes de créateurs et de leaders de technologies d'entreprise