Feed abonnieren

This toolkit is not officially supported by Red Hat Ansible support/engineering and is provided as is. It is intended a starting point for a Red Hat Consulting delivery of Ansible Tower.

Solution Reference Architecture

 

This diagram represents the reference architecture for a full high availability and disaster recovery solution. This solution can be individually tailored to address a single availability solution. For example, if only disaster recovery is needed the configuration supports exclusion of the HA replica.

High Availability

Ansible Tower clustering provides increased availability by distributing jobs across nodes in a cluster. A failure of a single node results in reduced capacity in the cluster. The database remains a single point of failure in a cluster. If the the database becomes unavailable the cluster will also become unavailable. This configuration provides for a replica database (HA Replica) in the primary cluster datacenter, which can be transitioned to primary. Although not completely automated, this provides for faster recovery in database outage scenarios.

NOTE: In the future this feature is planned to be delivered and supported by a third party.

HA Failover

 

HA Failback

 

Disaster Recovery

Ansible Tower clusters are not recommended to span datacenter boundaries due to latency and outage concerns. In the event of a total datacenter failure Ansible Tower would become unavailable. The Ansible Tower disaster recovery approach allows for failover to pre-provisioned resources in a secondary datacenter. The database in the secondary datacenter configured as a warm standby/replica of the database in the primary datacenter. During a failover, Ansible Tower is installed onto the pre-provisioned nodes and pointed to the replica database (promoted to primary)

DR Failover

 

DR Failback

 

Streaming Replication

PostgreSQL provides built in mechanisms to achieve increased availability. The use of warm standby or replica databases allows for simple and fast failover in recovery scenarios.

Configuration

Assumptions/Prerequisites

  • all Ansible Tower machines specified in inventory are pre-provisioned with authentication mechanism known (password, SSH keys)
  • Ansible control machine (RHEL 7 or CentOS) available and configured with Ansible 2.7+
  • if not running as root and need to use privilege escalation (eg sudo) you need to set it up in the inventory (ansible_become=true)
  • If there is no connectivity to the internet the bundle installation media will need to be placed in the tower_installer directory. Please ensure the bundle is available before preceding.
  • The Ansible Tower installation inventory for each configuration will need to be defined.
  • This toolkit and the playbook suite is meant to be run by a one user at a time and one playbook at a time. For example, do not try running multiple instances of the tower-setup-replication.yml playbook from the same playbook_dir. Issues can arise because a dynamic inventory script is used with a tmp file indicating which file to load. This mechanism allows to effectively change the inventory during playbook execution.

Setup

  1. Clone this repository to the configure Ansible control machine and enter directory
git clone https://github.com/redhat-cop/automate-tower-ha-dr.git
cd automate-tower-ha-dr
  1. Create a directory for your Tower installation inventories. Create the appropriate inventory_pminventory_ha and inventory_dr Tower installation inventory files in the directory. Examples are provided in the inventory_dr_static and inventory_ha_dr directories of this repository.

Some points to note about your Ansible Tower inventory files:

  • Each inventory represents a separate configuration for Tower (primary, HA, DR)
  • You must define a primary inventory(inventory_pm) along with one or both of the HA inventory(inventory_ha) and DR inventory(inventory_dr)
  • There should be no overlap between primary/HA and disaster recovery instance groups, include the default towerinstance group across inventory files, This goes back to the discussion above that instance groups cannot span datacenters. Isolated instance groups can be repeated if you with to utilize existing isolated nodes.
  • The database and database_replica group membership should be unique across all inventory files. The database group should have only one database and is the database in use the the given configuration. The database_replica groups contain the streaming replicas to be configured.
  • If an external database team is managing the Ansible Tower database and handling the replication and failover, the database_replica group can be excluded and the tower_db_external (explained below) to skip any replication configuration
  • The example inventory files show various configurations for setting up replication in a failover scenario.
    • The HA inventory file, used in HA failover, has streaming replication configured back to the original master and DR database. This is optional but in order to 'failback', replication to the original master must be re-enabled.
    • The DR inventory file, used in DR failover, has streaming replication configured back to the original master and leaves replication to the HA database. This is optional but in order to 'failback', replication to the original master must be re-enabled.

Examples

inventory_ha_dr/inventory_pm

[tower]
towervm1 ansible_ssh_host="10.26.10.50"

[database]
towerdb1 ansible_host="10.26.10.20"

[database_replica]
towerdb2 ansible_host="10.26.10.21" pgsqlrep_type=local
towerdb3 ansible_host="10.26.10.22" pgsqlrep_type=remote

[database_all:children]
database
database_replica

[database_all:vars]
pgsqlrep_password=password4

[all:vars]
<<CLIPPED>>
pg_host='10.26.10.20'
<<CLIPPED>>

inventory_ha_dr/inventory_dr

[tower]
towervm2 ansible_host="10.26.10.51"

[database]
towerdb3 ansible_host="10.26.10.22"

[database_replica]
towerdb1 ansible_host="10.26.10.20" pgsqlrep_type=remote

[database_all:children]
database
database_replica

[database_all:vars]
pgsqlrep_password=password4

[all:vars]
<<CLIPPED>>
pg_host='10.26.10.22'
<<CLIPPED>>

inventory_ha_dr/inventory_ha

[tower]
towervm1 ansible_host="10.26.10.50"

[database]
towerdb2 ansible_host="10.26.10.21"

[database_replica]
towerdb1 ansible_host="10.26.10.20" pgsqlrep_type=local
towerdb3 ansible_host="10.26.10.22" pgsqlrep_type=remote

[database_all:children]
database
database_replica

[database_all:vars]
pgsqlrep_password=password4

[all:vars]
<<CLIPPED>>
pg_host='10.26.10.21'
<<CLIPPED>>
  1. Copy tower-vars-base.yml to tower-vars.yml for customization in your environments
cp tower-vars-base.yml tower-vars.yml
  1. Modify the tower-vars.yml file for your environment. A description of the most commonly customized values are provided below. This includes definition of the inventory file for each configuration (primary/normal, HA, DR) and referencing their location. This file will be read in by all toolkit playbooks
# version of Ansible Tower to install/working with
tower_version: 3.3.0-1

# determine if the bundle is being used
tower_bundle: true

# indicated whether this will be installed without internet connectivity
tower_disconnected: true

# list of Ansible tower installer inventory files for each configuration
tower_inventory_pm: inventory_ha_dr/inventory_pm
tower_inventory_dr: inventory_ha_dr/inventory_dr
tower_inventory_ha: inventory_ha_dr/inventory_ha

# indicate whether the database is managed by the installer and toolkit or
# provided as a service.  If set to true, all replication configuration is skipped
tower_db_external: false
  1. Run the tower-setup.yml playbook. This playbook will take care of downloading the tower installation media for you installation (if it does not yet exist) and running the tower installer. The version to be downloaded and/or used in the installation is found in the tower-vars.yml file.

If you are running in a disconnected environment set the tower_disconnected variable to true and ensure the installer bundle is already downloaded. For example for 3.3.1 ensure tower-installer/ansible-tower-setup-bundle-3.3.1.el7.tar.gz is in place

ansible-playbook tower-setup.yml

If you want skip running Ansible Tower setup and only utilize this playbook to download the correct installer you can override the tower_download_only variable and run the playbook.

ansible-playbook tower-setup.yml -e 'tower_download_only=1'
  1. Run the tower-dr-standup.yml to prepare the failover cluster and configure replication.
ansible-playbook tower-dr-standup.yml

If applicable, you may want to check the status of the replication

ansible-playbook tower-check-replication.yml

At this point the secondary/DR machines are ready for failover and streaming replication enabled

HA Failover

In the event of a database outage in the primary database the following playbook can be run to failover to the HA replica

ansible-playbook tower-ha-failover.yml

Once the primary database has been repaired you must re-enable replication to synchronize data before failing back. Also ensure the database_replica group has the repaired database host if you took it out before doing the HA failover. The easiest way to enable the replication is to re-run the failover playbook.

ansible-playbook tower-ha-failover.yml

This won't have any effect on the running cluster but will re-enable replication. If you wish to be more targeted/explicit you can also run

ansible-playbook -i INV_DIR/inventory_ha tower-setup-replication.yml
HA Failback

to failback to the original configuration

ansible-playbook tower-ha-failover.yml -e 'tower_failback=1'

DR Failover

In the event of a primary datacenter outage, the playbook can be run to failover to the secondary database (including pointing to the DR replica)

ansible-playbook tower-dr-failover.yml

Once the primary datacenter has been repaired you must re-enable replication to synchronize data before failing back. Also ensure the database_replica group has the repaired database host if you took it out before doing the DR failover. The easiest way to enable the replication is to re-run the failover playbook.

ansible-playbook tower-dr-failover.yml

This won't have any effect on the running cluster but will re-enable replication. If you wish to be more targeted/explicit you can also run

ansible-playbook -i INV_DIR/inventory_dr tower-setup-replication.yml

to failback to the original configuration

ansible-playbook tower-dr-failover.yml -e 'tower_failback=1'

Backup and Restore

Ansible Tower Backup and Restore Documentation

 

Clustering

In addition to the base single node installation, Tower offers clustered configurations to allow users to horizontally scale job capacity (forks) on nodes. It is recommended to deploy tower nodes in odd numbers to prevent issues with underlying RabbitMQ clustering.

Tower clustering minimizes the potential of job execution service outages by distributing jobs across the cluster. For example, if you have an Ansible Tower installation with a three node cluster configuration and the Ansible Tower services on a node become unavailable in the cluster, jobs will continue to be executed on the remaining two nodes. It should be noted, the failed Ansible Tower node needs to remediated to return to a supported configuration containing three or more nodes. See setup considerations

Tower cluster nodes and database should be geographically co-located with low latency (<10 ms) and reliable connectivity. Deployments that span datacenters are not recommended due to transient spikes in latency and/or outages.

Database Availability

Ansible Tower utilizes PostgreSQL for application level data storage. The Tower setup process does not configure streaming replica configuration/hot standby configurations, which can be used for disaster recovery or high availability solutions. Streaming replication can be enabled and configured as a Red Hat Consulting delivered solution. The Tower database can be replicated to high availability instance in the local datacenter and/or to a disaster recovery instance in a remote datacenter. The later being utilized in a disaster recovery scenario. In the case of a failure in only the local database, the high availability instance can be promoted to a primary instance and the Tower cluster updated to utilize the instance. In the case of a full primary datacenter outage, the disaster recovery instance can be promoted to a primary instance a new Tower cluster deployed and pointed to the instance.

Disaster Recovery

As discussed above, Ansible Tower clusters can not span multiple datacenters and the default setup configuration does not support multiple clusters. This toolkit aims to provide a toolkit to bring a secondary cluster online.

Connect with Red Hat Services

Learn more about Red Hat Consulting
Learn more about Red Hat Training
Learn more about Red Hat Certification
Join the Red Hat Learning Community
Subscribe to the Training Newsletter
Follow Red Hat Services on Twitter
Follow Red Hat Open Innovation Labs on Twitter
Like Red Hat Services on Facebook
Watch Red Hat Training videos on YouTube
Follow Red Hat Certified Professionals on LinkedIn


Über den Autor

UI_Icon-Red_Hat-Close-A-Black-RGB

Nach Thema durchsuchen

automation icon

Automatisierung

Das Neueste zum Thema IT-Automatisierung für Technologien, Teams und Umgebungen

AI icon

Künstliche Intelligenz

Erfahren Sie das Neueste von den Plattformen, die es Kunden ermöglichen, KI-Workloads beliebig auszuführen

open hybrid cloud icon

Open Hybrid Cloud

Erfahren Sie, wie wir eine flexiblere Zukunft mit Hybrid Clouds schaffen.

security icon

Sicherheit

Erfahren Sie, wie wir Risiken in verschiedenen Umgebungen und Technologien reduzieren

edge icon

Edge Computing

Erfahren Sie das Neueste von den Plattformen, die die Operations am Edge vereinfachen

Infrastructure icon

Infrastruktur

Erfahren Sie das Neueste von der weltweit führenden Linux-Plattform für Unternehmen

application development icon

Anwendungen

Entdecken Sie unsere Lösungen für komplexe Herausforderungen bei Anwendungen

Original series icon

Original Shows

Interessantes von den Experten, die die Technologien in Unternehmen mitgestalten